← Product pageDownload PDFBuy Online
ZEEL PRODUCT
ZEEL PRODUCT
A-23, Reva Duplex, Behind Bharat Petrol Pump, Near Shyamal Greens, Ankhol, New Waghodia Road, Vadodara, Gujarat 390019, India
Tel: +91 97245 93964, +91 97238 59512 · [email protected]
ISO 9001:2015 · ISO 14001:2015 · ISO 22000:2018

Technical Data SheetZEELCHEM™ NDF — Non-Silicone Defoamer

Technical Data Sheet
Document no.ZP/TDS/NDF/01
Revision01
Issue date12-11-2026
Product typeSilicone-free defoamer emulsion
AppearanceThick, milky white liquid emulsion
Ionic natureNon-ionic
pH (as such, 25 °C)6.0 – 8.5
Specific gravity (25 °C)0.95 – 1.02
Viscosity (Brookfield, 25 °C)1,000 – 3,000 cP
Non-volatile matter (105 °C)25 – 30 %

1Product description

ZEELCHEM™ NDF is a silicone-free defoamer based on EO/PO polyether and fatty alcohol chemistry, supplied as a thick, milky white liquid emulsion. It controls macro-foam and entrained air without the craters, fish-eyes or recoat problems associated with silicone, and is suited to coatings, paper, adhesives, construction chemicals and silicone-sensitive processes.

Product type: Silicone-free defoamer emulsion (polyether / fatty alcohol based) · Brand: ZEELCHEM™ · Manufacturer: ZEEL PRODUCT, Vadodara, India

2Typical properties

PropertyTypical value
AppearanceThick, milky white liquid emulsion
Chemical natureSilicone-free: EO/PO polyether + fatty alcohol emulsion
Silicone contentNil
Ionic natureNon-ionic
pH (as such, 25 °C)6.0 – 8.5
Specific gravity (25 °C)0.95 – 1.02
Viscosity (Brookfield, 25 °C)1,000 – 3,000 cP
Non-volatile matter (105 °C)25 – 30 %
SolubilityDispersible in water
Flash pointNot applicable (water based)

Typical values, not a specification. Refer to the batch Certificate of Analysis.

3Features & benefits

  • 100 % silicone-free — no craters, fish-eyes or recoat issues
  • Good knockdown and air release
  • Polyether component active above cloud point — ideal for warm processes
  • Non-ionic, wide compatibility
  • Easy to handle, water-dispersible

4Applications

  • Water-based paints, primers, putty and coatings
  • Paper & pulp — wet end, size press, coating
  • Adhesives, printing inks and polymer emulsions
  • Construction chemicals — admixtures, waterproofing
  • Fermentation and warm process liquors
  • Effluent treatment where silicone is not desired

5Recommended starting dosage

ApplicationStarting dosage
Water-based paints & coatings0.1 – 0.5 % on total formula
Paper machine wet endLow ppm on stock, on demand
Adhesives & emulsions0.05 – 0.3 %
Construction chemicals0.05 – 0.5 %

Optimum dosage depends on the system and should be established by trial. Start at the lower level and increase until foam is controlled.

6Method of application

  • Stir or roll the container gently before use.
  • Use as supplied, or pre-dilute by adding the product slowly to clean cold / room-temperature water under stirring (typically 1:5 to 1:20). Use dilutions within 24 hours.
  • Dose continuously at, or just before, the point of foam generation using a metering pump, spray nozzle or batch addition.

7Packing

50 kg HDPE carboy · 200 kg HDPE drum · 1,000 kg IBC (on request).

8Storage & shelf life

Store in tightly closed original containers in a cool, shaded place between 5 °C and 35 °C. Protect from frost and direct sunlight. Shelf life: 12 months from date of manufacture in unopened packs. Stir before use.

9Handling & safety

Wear gloves and safety goggles. Spills make floors slippery — absorb with inert material and clean promptly. Refer to the Safety Data Sheet (SDS) before use.

The information in this data sheet is based on our present knowledge and is given in good faith for reference. It does not constitute a warranty or specification. Users should test the product to establish suitability for their own process. ZEELCHEM™ is a brand of ZEEL PRODUCT.
© ZEEL PRODUCT · ZEELCHEM™ — confidential reference document, reproduction prohibitedwww.zeelproduct.com/defoamer