+91 97245 93964+91 97238 59512[email protected] ISO 9001 · 14001 · 22000 Buy DF Buy NDF
ZEELCHEM™ NDF

ZEELCHEM™ NDF — Non-Silicone Defoamer

Silicone-free foam control based on mineral oil, fatty alcohol and polyether chemistries. Excellent knockdown and air release without craters, fish-eyes or recoat problems.

ZEELCHEM™ NDF Non-Silicone Defoamer — 50 kg blue HDPE carboy and milky white emulsion
Product overview

ZEELCHEM™ NDF Non-Silicone Defoamer

In short

ZEELCHEM™ NDF is ZEEL PRODUCT's non-silicone (silicone-free) defoamer range for water-based paints and coatings, paper and pulp, adhesives, printing inks, polymer emulsions, construction chemicals and any process where silicone is unwanted.

  • Silicone-free — No silicone residue for coatings, printing and gluing.
  • Defect-free films — Avoids craters, fish-eyes and poor recoat adhesion.
  • Micro-foam & air release — Removes entrained air for dense, pinhole-free films.
  • Polyether option — Cloud-point grades for hot processes and fermentation.

Price: ₹60/kg + 18% GST · ₹3,000 per 50 kg carboy · freight extra

Chemistry

Chemical structure of ZEELCHEM™ NDF

ZEELCHEM™ NDF uses silicone-free polyether and fatty-alcohol chemistry that breaks foam without surface defects.

HOCH2–CH2–OaEOCH2–CH–ObPOCH3CH2–CH2–OcEOH
EO/PO polyether block copolymerHO–(EO)ₐ–(PO)ᵦ–(EO)꜀–H. Insoluble above its cloud point, where it acts as a silicone-free defoamer. CAS 9003-11-6.
OHCH3C16–C18 chain
Fatty alcohol (C16–C18)Long-chain alcohols such as cetyl/stearyl alcohol spread on bubble films and destabilise foam — typical of silicone-free paper and ETP grades.

Mineral-oil grades use paraffinic hydrocarbons (CₙH₂ₙ₊₂) with hydrophobic waxes. Structures show the typical active chemistries of non-silicone defoamers; the exact ZEELCHEM™ NDF composition depends on grade.

Features & benefits

Why plants choose ZEELCHEM™ NDF

Silicone-free

No silicone residue for coatings, printing and gluing.

Defect-free films

Avoids craters, fish-eyes and poor recoat adhesion.

Micro-foam & air release

Removes entrained air for dense, pinhole-free films.

Polyether option

Cloud-point grades for hot processes and fermentation.

Construction ready

Works in admixtures, waterproofing and putty.

Tailor-made grades

Formulated and tested to your system.

Technical data

Typical properties

ParameterTypical value
AppearanceThick, milky white liquid emulsion
Chemical typeSilicone-free: EO/PO polyether + fatty alcohol emulsion (mineral-oil grades on request)
Silicone contentNil
Ionic natureNon-ionic
pH (as supplied)approx. 6.0 – 8.5
Specific gravity at 25 °Capprox. 0.95 – 1.02
Viscosity (Brookfield, 25 °C)approx. 1,000 – 3,000 cP
Non-volatile matter (105 °C)25 – 30 %
DilutabilityDispersible in water / add directly (grade-dependent)
Shelf lifeTypically 12 months in sealed original pack

Typical values for guidance only, not a specification. Refer to the TDS and batch COA.

Dosage

Recommended starting dosage

ApplicationStarting range
Water-based paints & primers0.1 – 0.5% on total formula
Paper machine wet endOn demand, low ppm on stock
Adhesives & polymer emulsions0.05 – 0.3%
Construction admixtures & coatings0.05 – 0.5%
Fermentation (polyether grade)On demand via foam probe

Start low and optimise by trial. Open the dosing calculator → See the dosage calculation guide.

Foam knockdown

Watch the foam collapse

A few drops of ZEELCHEM™ defoamer spread across the bubble walls, thin them and burst them — knocking foam down and keeping it down.

UntreatedStable foam
With ZEELCHEM™Foam knocked down

Illustrative animation of a cylinder foam test. Actual results depend on your system and dose.

How to use

Application method

  1. Stir or roll the carboy/drum gently before use.
  2. Dilute (if required) by adding the defoamer to clean water under stirring — not water into defoamer.
  3. Dose at, or just before, the point where foam is generated — by metering pump, spray nozzle or batch addition.
  4. Start at the low end of the dosage range and increase until foam is controlled.
  5. Record the minimum effective dose for each process.

Packing & storage

50 kg HDPE carboy · 200 kg HDPE drum · 1,000 kg IBC (on request). Store in closed containers at 5–35 °C, away from frost and direct sun. Stir before use.

ZEELCHEM™ NDF Non-Silicone Defoamer in 50 kg blue HDPE carboy
Technical documents

ZEELCHEM™ NDF Non-Silicone Defoamer TDS, SDS (MSDS) & COA

Reference documents with typical data — view online or download as PDF. Batch-specific signed COA is supplied with every consignment.

TDS

ZEELCHEM™ NDF Technical Data Sheet

Typical properties, applications, dosage, packing and storage.

SDS / MSDS

ZEELCHEM™ NDF Safety Data Sheet

16-section GHS format — hazards, first aid, handling, transport.

COA

ZEELCHEM™ NDF Certificate of Analysis

Specimen COA with batch test results and specifications.

Also on our websites

ZEELCHEM™ NDF Non-Silicone Defoamer on other ZEEL PRODUCT sites

Applications

Where NDF delivers

Looking for the other chemistry? See ZEELCHEM™ DF silicone defoamer or compare both.

FAQ

ZEELCHEM™ NDF Non-Silicone Defoamer — FAQs

What is ZEELCHEM™ NDF?

ZEELCHEM™ NDF is a silicone-free defoamer range by ZEEL PRODUCT based on mineral oil, fatty alcohol or polyether chemistries.

Why choose a non-silicone defoamer?

To avoid silicone-related defects such as craters and fish-eyes, and to meet silicone-free specifications in paints, inks, adhesives and paper.

Is ZEELCHEM™ NDF suitable for emulsion paint?

Yes, NDF grades are designed for water-based paints, primers and putty; we recommend a drawdown trial to finalise the dose.

What is the dosage of non-silicone defoamer?

Typically about 0.05–0.5% of the formulation, depending on application; confirm by trial.

Can NDF be used in hot processes?

Polyether NDF grades work above their cloud point and are suitable for hot processes.

What packing is available?

50 kg HDPE carboy, 200 kg drum and 1,000 kg IBC on request.

Got a foam problem? Get the right defoamer fast.

Share your process details — our technical team will recommend the right ZEELCHEM™ grade and starting dose, with price.