Defoamer Dosing Calculator
Work out exactly how much ZEELCHEM™ defoamer you need — per hour, per day and per month — plus pump setting, packs and cost.
Results are estimates from your inputs for planning only. Optimum dose depends on your process — start at the low end, confirm by plant trial and ask our team for dose guidance.
Defoamer dosage formulas
| Situation | Formula |
|---|---|
| Continuous flow, ppm | kg/h = flow (m³/h) × density (kg/L) × ppm ÷ 1,000 |
| Continuous flow, % | kg/h = flow (m³/h) × density × 1,000 × % ÷ 100 |
| Batch, % | kg = batch (L) × density × % ÷ 100 |
| Batch, ppm | kg = batch (L) × density × ppm ÷ 1,000,000 |
| Bath, g/L | kg = volume (L) × g/L ÷ 1,000 |
| Pump setting | L/h ≈ defoamer kg/h × (1 + dilution parts) |
Example: an ETP treating 50 m³/h at 20 ppm uses 50 × 1.0 × 20 ÷ 1,000 = 1.0 kg/h of ZEELCHEM™ DF — 24 kg/day. Diluted 1:10, set the pump to about 11 L/h. Read the full defoamer dosage guide.
FAQ
How do I calculate defoamer dosage?
For continuous flow: defoamer (kg/h) = flow (m³/h) × density (t/m³) × dose (ppm) ÷ 1,000. For a batch: defoamer (kg) = batch mass (kg) × dose (%) ÷ 100. The calculator does both.
What is a typical defoamer dose?
Silicone emulsion defoamers such as ZEELCHEM™ DF often work at about 10–200 ppm; non-silicone defoamers such as ZEELCHEM™ NDF at about 0.05–0.5 % of a formulation. Always confirm by trial.
How do I set my dosing pump?
If you dilute the defoamer 1:x with water, the pump must deliver the defoamer rate × (1 + x). For example 1 kg/h diluted 1:10 needs about 11 L/h.
Is ppm the same as g/m³?
For water and dilute aqueous systems, yes — 1 ppm ≈ 1 g per m³ ≈ 1 mg per litre.
Got a foam problem? Get the right defoamer fast.
Share your process details — our technical team will recommend the right ZEELCHEM™ grade and starting dose, with price.
