+91 97245 93964+91 97238 59512[email protected] ISO 9001 · 14001 · 22000 Buy DF Buy NDF
Answers

Defoamer FAQ

35 clear answers about defoamers, antifoaming agents and ZEELCHEM™ products.

What is a defoamer?

A defoamer, or antifoaming agent, is a chemical added in small amounts to break existing foam and prevent new foam in industrial liquids. ZEEL PRODUCT makes ZEELCHEM™ DF (silicone) and ZEELCHEM™ NDF (non-silicone) defoamers.

What is the difference between silicone and non-silicone defoamer?

Silicone defoamers are based on PDMS silicone and are extremely efficient across wide temperature and pH ranges. Non-silicone defoamers use oils, fatty alcohols or polyethers and avoid silicone-related surface defects in paints, inks, adhesives and paper.

Which defoamer is best for ETP and wastewater?

A silicone emulsion defoamer such as ZEELCHEM™ DF is the usual first choice for ETP, STP and aeration-tank foam because it works at low dosage.

Which defoamer is used in paint?

Non-silicone defoamers such as ZEELCHEM™ NDF are preferred in water-based paints and primers to avoid craters and recoat problems.

How much defoamer should I use?

Typical silicone emulsion doses are around 10–200 ppm and non-silicone doses about 0.05–0.5%, but the right dose must be confirmed by trial.

Do you provide technical support?

Yes. Share your application, process conditions and current dose — our team will recommend the right ZEELCHEM™ grade and starting dosage.

What packing sizes are available?

ZEELCHEM™ DF and NDF are supplied in 50 kg HDPE carboys and 200 kg drums, with 1,000 kg IBC on request.

Where is ZEEL PRODUCT located and do you deliver across India?

We are in Vadodara, Gujarat and dispatch defoamers across India. Call +91 97245 93964 or +91 97238 59512.

Is a defoamer the same as an antifoam?

In everyday use, yes. Technically, a defoamer destroys foam that has already formed and an antifoam prevents foam from forming, but most products, including ZEELCHEM™ DF and NDF, do both.

Can one product be both a defoamer and an antifoam?

Yes. Most commercial silicone emulsion defoamers and many non-silicone defoamers give both quick knockdown and lasting foam suppression.

What is silicone defoamer made of?

Mainly polydimethylsiloxane (silicone oil) with hydrophobic silica, emulsified in water with non-ionic emulsifiers.

What is a non-silicone defoamer?

A foam control agent made without silicone, using mineral oil, vegetable oil, fatty alcohols, esters or polyether polymers as the active ingredient.

Which is stronger, silicone or non-silicone defoamer?

Silicone defoamers are generally stronger per ppm, but the best product is the one that controls foam in your system without side effects.

What is the bridging-dewetting mechanism?

A defoamer droplet or hydrophobic particle spans both surfaces of a thin foam film; the liquid de-wets it, the film thins to zero at that point and ruptures.

What chemicals cause foaming?

Surfactants, detergents, proteins, saponified fats, starches, polymers and some fine solids are the most common foam stabilisers.

Which defoamer is used in ETP?

Silicone emulsion defoamers are most widely used in ETPs because they control aeration foam at low dosage.

Why is non-silicone defoamer used in paper machines?

It avoids silicone deposits and interference with sizing, printing and coating.

Which defoamer is best for jet dyeing?

A high-temperature, shear-stable silicone emulsion defoamer is usually best for jet and soft-flow dyeing.

What defoamer is used in emulsion paint?

Mineral-oil or other non-silicone defoamers are most common in emulsion paints because they avoid craters and recoat problems.

What antifoam is used in fermentation?

Silicone emulsions and polyether (EO/PO, polypropylene glycol) antifoams are the most common.

Is silicone antifoam safe in food?

Dimethylpolysiloxane (E900) is a permitted antifoaming agent in many foods within set limits, but always confirm the regulation for your product and country.

Which defoamer is used in distillery fermentation?

Silicone emulsion and polyether defoamers are commonly used; they should be tested to confirm no effect on yeast.

Why add antifoam to detergent?

To make low-foam products for machines, and to control foam during manufacturing and filling.

Why use defoamer in concrete admixture?

PCE superplasticizers can entrain unwanted air; a defoamer controls this to protect strength and finish.

Which antifoam is used in SC formulations?

Silicone antifoam emulsions are commonly used, often split before and after milling.

Why is my cooling tower foaming?

Common reasons are surfactants in biocides, organic leaks, microbial growth and high solids from high cycles of concentration.

Why do amine units foam?

Mostly due to contaminants such as liquid hydrocarbons, solids, degradation products and some corrosion inhibitors.

Which defoamer is used in acrylic emulsion?

Mineral-oil and other non-silicone defoamers are common; the grade must be tested for compatibility.

How do I know which defoamer to use?

Start from the foam source and process conditions, then test silicone and non-silicone options in your own liquid.

How many ppm of defoamer should I use?

Silicone emulsions often work at roughly 10–200 ppm, but confirm the dose with a trial in your system.

What is the simplest defoamer test?

The shake test in a stoppered cylinder, comparing foam volume and break time with and without defoamer.

Why is my defoamer not working?

The foam source may have changed, the dose point may be wrong, the defoamer may be exhausted or it may be the wrong chemistry.

What is the shelf life of defoamer?

Many emulsion defoamers have about 6–12 months when stored correctly; check the label and certificate of analysis.

Who manufactures defoamer in Vadodara?

ZEEL PRODUCT, Vadodara, Gujarat manufactures ZEELCHEM™ DF silicone and ZEELCHEM™ NDF non-silicone defoamers.

What is the price of silicone defoamer per kg?

It varies with active content, grade, packing and quantity. Contact ZEEL PRODUCT for a current quote.

Got a foam problem? Get the right defoamer fast.

Share your process details — our technical team will recommend the right ZEELCHEM™ grade and starting dose, with price.