+91 97245 93964+91 97238 59512[email protected] ISO 9001 · 14001 · 22000 Buy DF Buy NDF
ZEELCHEM™ DF

ZEELCHEM™ DF — Silicone Defoamer

High-efficiency silicone antifoam emulsion based on polydimethylsiloxane and hydrophobic silica. Fast knockdown, long persistence and wide temperature and pH stability — at very low dosage.

ZEELCHEM™ DF Silicone Defoamer — 50 kg blue HDPE carboy and milky white emulsion
Product overview

ZEELCHEM™ DF Silicone Defoamer

In short

ZEELCHEM™ DF is a water-dilutable silicone emulsion defoamer from ZEEL PRODUCT, Vadodara. It is used to control foam in effluent treatment plants, textile dyeing, detergent and chemical manufacturing, distilleries, agrochemicals and general industrial water systems, typically at about 10–200 ppm.

  • Instant knockdown — Collapses foam within seconds of addition.
  • Long persistence — Keeps foam down through continuous aeration and agitation.
  • Hot & cold stable — Performs from ambient to high-temperature processes.
  • Low ppm dosage — Concentrated actives mean less product per m³.

Price: ₹60/kg + 18% GST · ₹3,000 per 50 kg carboy · freight extra

Product videos

ZEELCHEM™ DF product videos

The thick, milky white silicone emulsion — and how it knocks down aeration-tank foam in an ETP.

Product: thick, milky white emulsion · HD ⬇
Application: ETP aeration-tank foam control · HD ⬇
Chemistry

Chemical structure of ZEELCHEM™ DF

ZEELCHEM™ DF combines PDMS silicone oil with hydrophobic silica — the oil–particle synergy behind its low-dose foam control.

H3CSiCH3CH3OSiCH3CH3OnSiCH3CH3CH3
Polydimethylsiloxane (PDMS)The active silicone oil — Si–O backbone with methyl groups gives very low surface tension (≈20–21 mN/m). CAS 63148-62-9.
SiSiSiSiSiO2 particle surfaceOSiOSiOSiOSiHydrophobic (methyl-silylated) silica
Hydrophobic silicaFine SiO₂ particles with methylsilyl surface groups pierce and de-wet foam films; with PDMS it forms the silicone antifoam compound.
Features & benefits

Why plants choose ZEELCHEM™ DF

Instant knockdown

Collapses foam within seconds of addition.

Long persistence

Keeps foam down through continuous aeration and agitation.

Hot & cold stable

Performs from ambient to high-temperature processes.

Low ppm dosage

Concentrated actives mean less product per m³.

Easy to dilute

Mixes with water for metering pumps and spray systems.

Inert & non-ionic

Compatible with most process chemicals.

Technical data

Typical properties

ParameterTypical value
AppearanceThick, milky white liquid emulsion
Chemical typePolydimethylsiloxane (silicone) emulsion with hydrophobic silica
Ionic natureNon-ionic
Active silicone content20 ± 2 % standard; 10 % and 30 % grades on request
pH (as supplied)approx. 6.0 – 8.0
Specific gravity at 25 °Capprox. 0.98 – 1.02
Viscosity (Brookfield, 25 °C)approx. 1,500 – 4,000 cP
Non-volatile matter (105 °C)20 – 24 %
DilutabilityReadily dilutable in cold / room-temperature water
Shelf lifeTypically 12 months in sealed original pack

Typical values for guidance only, not a specification. Refer to the TDS and batch COA.

Dosage

Recommended starting dosage

ApplicationStarting range
ETP / STP aeration & equalisation10 – 100 ppm on flow
Textile jet / soft-flow dyeing0.1 – 0.5 g/L
Detergent & chemical manufacture0.01 – 0.1% on batch
Distillery fermentation & spent washOn demand, 10 – 200 ppm
Agrochemical formulations0.1 – 0.5% on formula

Start low and optimise by trial. Open the dosing calculator → See the dosage calculation guide.

Foam knockdown

Watch the foam collapse

A few drops of ZEELCHEM™ defoamer spread across the bubble walls, thin them and burst them — knocking foam down and keeping it down.

UntreatedStable foam
With ZEELCHEM™Foam knocked down

Illustrative animation of a cylinder foam test. Actual results depend on your system and dose.

How to use

Application method

  1. Stir or roll the carboy/drum gently before use.
  2. Dilute (if required) by adding the defoamer to clean water under stirring — not water into defoamer.
  3. Dose at, or just before, the point where foam is generated — by metering pump, spray nozzle or batch addition.
  4. Start at the low end of the dosage range and increase until foam is controlled.
  5. Record the minimum effective dose for each process.

Packing & storage

50 kg HDPE carboy · 200 kg HDPE drum · 1,000 kg IBC (on request). Store in closed containers at 5–35 °C, away from frost and direct sun. Stir before use.

ZEELCHEM™ DF Silicone Defoamer in 50 kg blue HDPE carboy
Technical documents

ZEELCHEM™ DF Silicone Defoamer TDS, SDS (MSDS) & COA

Reference documents with typical data — view online or download as PDF. Batch-specific signed COA is supplied with every consignment.

TDS

ZEELCHEM™ DF Technical Data Sheet

Typical properties, applications, dosage, packing and storage.

SDS / MSDS

ZEELCHEM™ DF Safety Data Sheet

16-section GHS format — hazards, first aid, handling, transport.

COA

ZEELCHEM™ DF Certificate of Analysis

Specimen COA with batch test results and specifications.

Also on our websites

ZEELCHEM™ DF Silicone Defoamer on other ZEEL PRODUCT sites

Applications

Where DF delivers

Looking for the other chemistry? See ZEELCHEM™ NDF non-silicone defoamer or compare both.

FAQ

ZEELCHEM™ DF Silicone Defoamer — FAQs

What is ZEELCHEM™ DF?

ZEELCHEM™ DF is a silicone emulsion defoamer (silicone antifoam) made by ZEEL PRODUCT, Vadodara, for industrial foam control.

Where is ZEELCHEM™ DF used?

In effluent and sewage treatment plants, textile processing, detergents and chemicals, distilleries, agrochemicals, cooling water and general industrial processes.

How do I dilute ZEELCHEM™ DF?

Stir the pack, then add the defoamer slowly into clean cold or room-temperature water under stirring, at the ratio we recommend for your application. Use the dilution fresh.

What is the dosage of silicone defoamer?

Typically about 10–200 ppm depending on the system; we confirm the optimum dose by trial.

Can ZEELCHEM™ DF be used in paints?

For water-based paints we usually recommend ZEELCHEM™ NDF non-silicone defoamer to avoid craters; DF can be evaluated for specific systems.

What packing is available?

50 kg HDPE carboy, 200 kg drum and 1,000 kg IBC on request.

Got a foam problem? Get the right defoamer fast.

Share your process details — our technical team will recommend the right ZEELCHEM™ grade and starting dose, with price.