Quick answer: A silicone defoamer is an antifoam made from polydimethylsiloxane (PDMS) oil, usually with hydrophobic silica, supplied as a water-dilutable emulsion. It spreads rapidly over foam bubbles, thins their walls and makes them burst, then keeps new foam from forming – typically at 10–200 ppm.
Why foam is a problem in industry
Foam forms whenever gas is trapped in a liquid that contains surfactants, proteins or polymers. In effluent treatment plants it spills over aeration tanks; in textile dyeing it causes uneven shades; in paints it leaves pinholes; in fermentation it reduces working volume. Foam wastes product, slows production and creates safety and housekeeping problems.
How a silicone defoamer works
- Low surface tension: silicone oil (≈20 mN/m) is lower than almost any foaming liquid, so it spreads over the bubble film.
- Insolubility: it does not dissolve, so droplets stay active at the bubble surface.
- Bridging & dewetting: hydrophobic silica particles pierce the film and drain it until the bubble collapses.
Types of silicone defoamer
- Silicone emulsions (10–30 % active) – the most common, easy to dilute in water systems.
- Silicone compounds (100 %) – for oil-based and non-aqueous systems.
- Food-grade silicone antifoam – for food processing and fermentation.
- High-temperature / alkali-stable grades – for textile jet dyeing, pulp and boiler use.
Dosage and how to dose
Start at 10–50 ppm and increase until foam is controlled. Pre-dilute the emulsion 1:5 to 1:10 with cold water and dose at the point where foam forms, preferably through a metering pump for steady control.
How to choose the right defoamer
Consider temperature, pH, shear, the foaming agent and whether silicone is allowed downstream. Where silicone may cause coating defects, a non-silicone defoamer is the better choice. Share your process details and ZEELCHEM® will recommend the most economical grade.
Products in this guide
Silicone Defoamer
Silicone Defoamer is a polydimethylsiloxane (PDMS) based antifoam emulsion that knocks down existing foam and prevents new…
Non-Silicone Defoamer
Non-Silicone Defoamer is a silicone-free antifoam based on polyethers, fatty alcohols or mineral oils. It is used where…
Related articles
Advantages and Disadvantages of Silicone Defoamers
Pros and cons of silicone defoamers compared with non-silicone antifoams, and how to avoid common problems.
Silicone Defoamers & Anti-Foaming Agents
Difference between defoamers and anti-foaming agents, silicone vs non-silicone chemistry, and where each works best.
What is a silicone defoamer?
Short explainer: what a silicone defoamer is made of and why it controls foam so effectively.