Quick answer: Copper sulphate pentahydrate controls algae at low copper levels – about 0.2–0.5 mg/L as Cu in swimming pools. Dissolve it first, dose evenly, and avoid overdosing, which stains surfaces and harms fish.
Dosage guide
| Use | Typical dose |
|---|---|
| Swimming pools | 0.2–0.5 mg/L as Cu |
| Cooling towers | As algaecide booster, low ppm |
| Ponds & reservoirs | As per local regulations |
CuSO₄·5H₂O contains about 25% copper, so 2 g of product gives roughly 0.5 g Cu.
Precautions
- Do not use in fish ponds without expert advice.
- Keep pH stable – low pH increases copper staining.
- Store dry and away from metals.
Back to the pool chemicals list.
Frequently asked questions
How much copper sulphate is used for algae in a pool?
About 0.2–0.5 mg/L as copper; roughly 1–2 g of copper sulphate per m³, dosed after dissolving.
Is copper sulphate safe for swimming pools?
Yes at low doses; overdosing can stain surfaces and turn hair green.
Products in this guide
Copper Sulphate
Copper Sulphate Pentahydrate (CuSO₄·5H₂O) is a blue crystalline salt used as an algaecide in swimming pools, reservoirs,…
Related articles
Swimming Pool Chemicals List & Maintenance Guide
Essential swimming pool chemicals – chlorine, algaecide, pH adjusters, clarifiers – with ideal water parameters and a weekly maintenance routine.
TCCA 90 vs SDIC 60: Which Chlorine Is Best for Swimming Pools?
Compare TCCA 90 and SDIC 60 chlorine granules for swimming pools – available chlorine, dissolving speed, pH effect, stabiliser and dosage.