ISO 9001:2015 · ISO 22000:2018 · ISO 14001:2015🛒 Online Store ↗
ZEEL PRODUCT Z logoZEEL PRODUCT®ZEELCHEM® · Water Treatment Chemicals
Get a Quote
Waste Water · 15 October 2026

Polyelectrolyte in ETP: Anionic vs Cationic and How to Choose

How polyelectrolyte works in effluent treatment plants, the difference between anionic and cationic polyelectrolyte, jar testing and dosage.

Quick answer: Polyelectrolyte is a high-molecular-weight flocculant that binds fine particles into large flocs. Use anionic grades for inorganic solids and clarification after a coagulant, and cationic grades for organic sludge and dewatering. Always confirm with a jar test.

Anionic vs cationic

AnionicCationic
ChargeNegativePositive
Best forMineral solids, clarifiersBiological sludge, dewatering
pH range6–141–10
Typical dose0.2–2 mg/L2–10 kg/t dry solids

How to run a jar test

  1. Take 6 beakers of effluent.
  2. Add coagulant (PAC/alum) at increasing doses, fast mix 1 min.
  3. Add 0.1% polymer solution, slow mix 3 min.
  4. Compare floc size, settling speed and clarity.

Related: polyacrylamide uses and the ETP chemicals list.

#polyelectrolyte#anionic polyelectrolyte#cationic polyelectrolyte#ETP chemicals

Frequently asked questions

What is the use of polyelectrolyte in ETP?

It flocculates suspended solids so they settle faster in clarifiers and dewater better in filter presses and centrifuges.

How do I prepare polyelectrolyte solution?

Sprinkle powder slowly into a stirred tank to make a 0.1–0.2% solution and mix for about 45–60 minutes before use.

Products in this guide

Related articles

Fast quotation

Need a price or TDS / MSDS / COA?

Share your product, quantity and delivery location. Our technical sales team replies within business hours with price, availability and documents.