Quick answer: Polyacrylamide (PAM) is the most widely used flocculant. Anionic PAM (APAM) clarifies mineral-laden water, cationic PAM (CPAM) dewaters organic sludge, and non-ionic PAM works in acidic or high-salt conditions. Doses are usually 0.1–5 mg/L for clarification.
Uses of PAM
Selecting the grade
- Charge density – match to particle charge (jar test).
- Molecular weight – higher for faster settling, lower for clearer filtrate.
- Residual monomer – choose ≤ 0.05% grades.
See also anionic vs cationic polyelectrolyte.
Frequently asked questions
What is polyacrylamide used for?
As a flocculant in water and wastewater treatment, sludge dewatering, paper making, mining and oilfield.
Is polyacrylamide safe?
The polymer is low-toxicity; quality grades keep residual acrylamide monomer very low (≤ 0.05%).
Products in this guide
Polyacrylamide
Polyacrylamide (PAM) is a high-molecular-weight water-soluble polymer of acrylamide supplied as anionic (APAM), cationic…
Polyelectrolyte
Polyelectrolyte is a high-molecular-weight water-soluble polymer flocculant that binds fine suspended particles into large…
Related articles
Polyelectrolyte in ETP: Anionic vs Cationic and How to Choose
How polyelectrolyte works in effluent treatment plants, the difference between anionic and cationic polyelectrolyte, jar testing and dosage.
ETP Chemicals List: Chemicals Used in Effluent Treatment Plants
Complete list of ETP chemicals – coagulants, flocculants, pH correction, defoamers, nutrients and disinfectants – and where each is used in an effluent treatment plant.
STP Chemicals List: Chemicals Used in Sewage Treatment Plants
Chemicals used in sewage treatment plants (STP) – bio-culture support, polyelectrolyte, defoamer, chlorine and odour control – with typical uses.