Quick answer: Sewage treatment plants mainly use a polyelectrolyte for sludge dewatering and tertiary clarification, a defoamer for aeration foam, chlorine such as SDIC or hypochlorite for disinfection, and pH and nutrient support for the biology.
STP chemicals
- Polyelectrolyte: sludge thickening and filter press dewatering.
- Defoamer: controls start-up and detergent foam.
- Disinfectant: chlorine to meet coliform limits for reuse.
- Coagulant: tertiary filtration and phosphorus removal.
Tips for apartments & hotels
Most STP problems come from overloading and poor sludge wasting, not chemicals. Dose polymer only for dewatering and keep the aeration DO at 1.5–2 mg/L.
Industrial effluent? See the ETP chemicals list.
Frequently asked questions
What chemicals are used in an STP?
Polyelectrolyte, defoamer, chlorine disinfectant and sometimes coagulant and pH correction chemicals.
Which chlorine is used in STP?
Sodium hypochlorite or chlorine tablets/granules such as SDIC or TCCA for final disinfection.
Products in this guide
Polyelectrolyte
Polyelectrolyte is a high-molecular-weight water-soluble polymer flocculant that binds fine suspended particles into large…
Silicone Defoamer
Silicone Defoamer is a polydimethylsiloxane (PDMS) based antifoam emulsion that knocks down existing foam and prevents new…
SDIC 60 Granular
SDIC 60 Granular is Sodium Dichloroisocyanurate with about 60% available chlorine. It dissolves quickly and has a…
Related articles
ETP Chemicals List: Chemicals Used in Effluent Treatment Plants
Complete list of ETP chemicals – coagulants, flocculants, pH correction, defoamers, nutrients and disinfectants – and where each is used in an effluent treatment plant.
Polyelectrolyte in ETP: Anionic vs Cationic and How to Choose
How polyelectrolyte works in effluent treatment plants, the difference between anionic and cationic polyelectrolyte, jar testing and dosage.
Polyacrylamide (PAM) Uses in Wastewater Treatment & Dosage
Polyacrylamide (APAM, CPAM, NPAM) uses in wastewater, sludge dewatering, paper and mining – how to select the grade and typical dosage.