Quick answer: Glutaraldehyde 50% is a fast-acting non-oxidizing biocide that cross-links microbial proteins. It is effective against bacteria including sulfate-reducing bacteria (SRB), works across a wide pH range and is typically slug-dosed at 25–100 mg/L in cooling water.
Where it is used
Advantages
- Works at high pH where chlorine is weak
- Not deactivated by sulfides
- Readily biodegradable
Safety
Glutaraldehyde vapour is irritating; use closed dosing and PPE. Compare with CMIT/MIT.
Frequently asked questions
What is glutaraldehyde used for in water treatment?
As a non-oxidizing biocide for cooling towers, oilfield water and paper mills, especially where SRB or biofilm are a problem.
What is the dosage of glutaraldehyde in cooling towers?
Typically 25–100 mg/L of 50% product as a slug dose, depending on microbial counts.
Products in this guide
Glutaraldehyde 50%
Glutaraldehyde 50% is a fast-acting, broad-spectrum non-oxidizing biocide (a dialdehyde) that kills bacteria,…
Related articles
Oxidizing vs Non-Oxidizing Biocides for Cooling Towers
Difference between oxidizing and non-oxidizing biocides, when to use each, how to alternate them, and typical doses for cooling tower microbial control.
Isothiazolinone (CMIT/MIT) Biocide: Uses, Dosage & Safety
CMIT/MIT isothiazolinone biocide explained – 14% vs 1.4% grades, uses in cooling towers, paints and detergents, dosage and handling safety.