Quick answer: Isothiazolinone (CMIT/MIT) is a broad-spectrum non-oxidizing biocide that controls bacteria, fungi, algae and slime at ppm levels. The 14% concentrate is used in large cooling systems and for formulators; the 1.4% ready-to-use grade suits small systems and in-can preservation.
14% vs 1.4%
| CIT/MIT 14% | CIT/MIT 1.4% | |
|---|---|---|
| Use | Cooling towers, formulations | Air washers, detergents, paints |
| Cooling dose | 5–15 mg/L slug | 50–150 mg/L slug |
| Handling | Corrosive – full PPE | Easier, still irritant |
Uses
- Cooling towers & air washers
- Paper mill slime control
- Paints, adhesives, emulsions (preservative)
- Detergents and household products
Safety
Isothiazolinones are skin sensitisers. Wear gloves and goggles, avoid mixing with reducing agents or amines (they deactivate the biocide), and follow the MSDS. Compare with other biocides in oxidizing vs non-oxidizing biocides.
Frequently asked questions
What is CIT/MIT used for?
As a broad-spectrum biocide and preservative in cooling water, paper mills, paints, adhesives and detergents.
Is CIT/MIT the same as Kathon?
Kathon is a trade name for a CMIT/MIT blend; ZEELCHEM CIT/MIT 14% and 1.4% are equivalent chemistries.
Products in this guide
CIT/MIT 14%
CIT/MIT 14% is a concentrated blend of 5-chloro-2-methyl-4-isothiazolin-3-one (CMIT) and 2-methyl-4-isothiazolin-3-one (MIT)…
CIT/MIT 1.4%
CIT/MIT 1.4% is a ready-to-use, diluted isothiazolinone (CMIT/MIT) biocide and preservative. It controls bacteria, fungi and…
Related articles
Oxidizing vs Non-Oxidizing Biocides for Cooling Towers
Difference between oxidizing and non-oxidizing biocides, when to use each, how to alternate them, and typical doses for cooling tower microbial control.
Cooling Tower Water Treatment Chemicals: Complete List & Uses
Complete list of cooling tower water treatment chemicals – scale inhibitors, corrosion inhibitors, dispersants, biocides, bio-dispersants and pH control – with typical uses.
Glutaraldehyde 50% as a Biocide: Uses in Water Treatment
How glutaraldehyde 50% works as a biocide, uses in cooling towers, oilfield water and paper mills, dosage and safety.