Quick answer: A cooling tower programme uses five groups of chemicals: scale inhibitors, corrosion inhibitors, polymer dispersants, biocides (oxidizing and non-oxidizing) and pH/alkalinity control. Together they keep heat exchangers clean, protect metal and stop biofilm and Legionella.
Cooling tower chemicals list
| Chemical group | Typical actives | Controls |
|---|---|---|
| Scale inhibitor | HEDP, PBTC, PAPEMP | CaCO₃, CaSO₄ scale |
| Dispersant | PAA, AA/AMPS, terpolymer | Silt, iron, phosphate |
| Corrosion inhibitor | Phosphonate–zinc, azoles (BTA/TTA) | Steel & copper corrosion |
| Oxidizing biocide | Chlorine, bromine, TCCA | Bacteria, algae |
| Non-oxidizing biocide | CIT/MIT, glutaraldehyde | Biofilm, slime, SRB |
| pH / alkalinity control | Acid or alkali | Scaling tendency |
How the programme fits together
The scale inhibitor and dispersant let the tower run more cycles of concentration, saving make-up water. The corrosion inhibitor protects pipes and exchangers. Alternating two biocides stops microbes from adapting – see oxidizing vs non-oxidizing biocides.
Monitoring
- Daily: pH, conductivity, free chlorine.
- Weekly: calcium hardness, alkalinity, inhibitor residual.
- Monthly: corrosion coupons, bacteria counts (dip slides).
Explore our complete cooling water chemicals range.
Frequently asked questions
Which chemicals are used in cooling towers?
Scale inhibitors (HEDP, PBTC), dispersant polymers (PAA, AA/AMPS), corrosion inhibitors, oxidizing and non-oxidizing biocides, and pH control chemicals.
How often should cooling tower chemicals be dosed?
Inhibitors are dosed continuously in proportion to bleed-off; biocides are usually slug-dosed one to three times a week.
What is the best scale inhibitor for cooling towers?
PBTC and HEDP blended with a polymer dispersant suit most systems; PAPEMP is preferred for very high hardness.
Products in this guide
HEDP 60
HEDP 60, ZEELCHEM™ 101, is 1-Hydroxyethylidene-1,1-Diphosphonic Acid – an organophosphonate scale and corrosion inhibitor…
PBTC 50
PBTC 50, ZEELCHEM™ 121, is 2-Phosphonobutane-1,2,4-Tricarboxylic Acid – a low-phosphorus phosphonate with superior calcium…
Polyacrylic Acid
Polyacrylic Acid (PAA), ZEELCHEM™ 1000, is a low-molecular-weight anionic homopolymer of acrylic acid. It works as a…
Related articles
Corrosion Inhibitors for Cooling Towers: Types & Dosage
Corrosion inhibitors for cooling towers and closed loops – phosphonate-zinc, azoles, molybdate and nitrite – how they work and typical dosage.
Cycles of Concentration in Cooling Towers: Formula & Calculation
How to calculate cycles of concentration (COC) in a cooling tower, make-up and blowdown formulas, and how higher COC saves water.
Common Water Treatment Chemicals and Their Roles
A simple guide to the most common water treatment chemicals – scale inhibitors, corrosion inhibitors, biocides, coagulants, flocculants, pH adjusters, oxygen scavengers and defoamers.