Quick answer: Low molecular weight polyacrylic acid (LMW PAA, Mw 2,000–5,000) keeps cooling tower heat exchangers clean by inhibiting calcium carbonate scale and dispersing silt and iron. Clean surfaces transfer heat better, so chillers and process coolers use less energy, and towers can run more cycles with less make-up water.
Why scale kills efficiency
Calcium carbonate has a thermal conductivity many times lower than steel. A thin scale layer forces higher condenser approach temperatures, raising power use and reducing production rates.
How LMW PAA helps
- Threshold inhibition – a few ppm delays crystal growth far above saturation.
- Crystal distortion – any crystals formed are soft and easily removed.
- Dispersion – suspended solids stay in the bulk water and leave with bleed-off.
Typical dosage
1–15 mg/L alone, or 2–10 mg/L combined with HEDP or PBTC. Confirm with water analysis and monitor calcium balance, turbidity and corrosion coupons.
Learn more on our Polyacrylic Acid (ZEELCHEM™ 1000) page or explore cooling tower chemicals.
Products in this guide
Related articles
Polyacrylic Acid vs Sodium Polyacrylate: Differences & Uses
Difference between polyacrylic acid (PAA) and sodium polyacrylate (PAAS) – pH, handling, water treatment and dispersant applications.
Why Molecular Weight Matters in Scale Inhibition - Polyacrylic Acid
Why low molecular weight polyacrylic acid inhibits scale better than high molecular weight grades – and which molecular weight to choose.
Cooling Tower Water Treatment Chemicals: Complete List & Uses
Complete list of cooling tower water treatment chemicals – scale inhibitors, corrosion inhibitors, dispersants, biocides, bio-dispersants and pH control – with typical uses.