Quick answer: Polyacrylic acid (PAA) is the acid form (pH 3–4.5), ideal in acidic water-treatment blends. Sodium polyacrylate (PAAS) is its neutralised salt (pH 6.5–8.5), safer to handle and preferred in alkaline formulations, paper coating and pigment dispersion.
Key differences
| Property | PAA (ZEELCHEM™ 1000) | PAAS (ZEELCHEM™ 1000.Z7) |
|---|---|---|
| pH (as supplied) | 3.0–4.5 (1% soln) | 6.5–8.5 |
| Solids | 48–50% | 40–45% |
| Corrosivity | Mildly acidic | Non-corrosive |
| Best use | Cooling & boiler blends with phosphonates | Alkaline blends, paper, ceramics, paints |
Which one should you buy?
- Formulating with acidic phosphonates like HEDP? Use PAA.
- Need a neutral, safe dispersant for CaCO₃ or kaolin slurries? Use PAAS.
Molecular weight matters too – see why molecular weight matters in scale inhibition.
Frequently asked questions
Is sodium polyacrylate the same as polyacrylic acid?
It is the sodium salt of polyacrylic acid – the same polymer backbone, neutralised to near-neutral pH.
Which is better for water treatment?
Both inhibit scale; PAA is more common in acidic cooling-water blends, PAAS where a neutral product is needed.
Products in this guide
Polyacrylic Acid
Polyacrylic Acid (PAA), ZEELCHEM™ 1000, is a low-molecular-weight anionic homopolymer of acrylic acid. It works as a…
Sodium Polyacrylate Liquid
Sodium Polyacrylate Liquid, ZEELCHEM™ 1000.Z7, is the neutralised sodium salt of low-molecular-weight polyacrylic acid. It…
Related articles
Why Molecular Weight Matters in Scale Inhibition - Polyacrylic Acid
Why low molecular weight polyacrylic acid inhibits scale better than high molecular weight grades – and which molecular weight to choose.
Optimizing Cooling Tower Efficiency with LMW Polyacrylic Acid - PAA
How low molecular weight polyacrylic acid improves cooling tower efficiency by controlling scale and dispersing deposits – with dosing guidance.
What is polymer water treatment?
How water treatment polymers – scale inhibitors, dispersants and flocculants – work, and the difference between anionic, cationic and non-ionic polymers.