Quick answer: HEDP is a phosphonate scale and corrosion inhibitor and chelating agent. It is used at 1–10 mg/L for scale control and 10–50 mg/L for corrosion control in cooling water, and as a peroxide stabiliser in textiles and detergents.
Main uses of HEDP
Why HEDP works
HEDP adsorbs on growing calcium carbonate crystals and blocks their growth at very low doses (threshold effect). It is stable against hydrolysis at high temperature and pH, and with zinc forms a protective film on mild steel.
HEDP dosage
- Scale inhibition: 1–10 mg/L.
- Corrosion inhibition: 10–50 mg/L (often with zinc).
- Textile bleaching: 0.5–1 g/L.
Comparing phosphonates? Read HEDP vs ATMP vs PBTC. HEDP 60 (ZEELCHEM™ 101) is supplied in 35 kg carboys, 250 kg drums and IBCs.
Frequently asked questions
What is HEDP used for?
HEDP is used as a scale and corrosion inhibitor in cooling water and boilers, and as a chelating agent and peroxide stabiliser in textiles and detergents.
What is the CAS number of HEDP?
The CAS number of HEDP is 2809-21-4.
Is HEDP stable with chlorine?
HEDP is moderately stable; for systems with high chlorine or bromine, PBTC is more resistant.
Products in this guide
HEDP 60
HEDP 60, ZEELCHEM™ 101, is 1-Hydroxyethylidene-1,1-Diphosphonic Acid – an organophosphonate scale and corrosion inhibitor…
ATMP 50
ATMP 50, ZEELCHEM™ 111, is Amino Tris(Methylene Phosphonic Acid) – a cost-effective phosphonate with excellent threshold…
PBTC 50
PBTC 50, ZEELCHEM™ 121, is 2-Phosphonobutane-1,2,4-Tricarboxylic Acid – a low-phosphorus phosphonate with superior calcium…
Related articles
HEDP vs ATMP vs PBTC vs DTPMP: Which Phosphonate Should You Choose?
Side-by-side comparison of HEDP, ATMP, PBTC, DTPMP and PAPEMP phosphonates – scale control, chlorine stability, temperature and best applications.
Cooling Tower Water Treatment Chemicals: Complete List & Uses
Complete list of cooling tower water treatment chemicals – scale inhibitors, corrosion inhibitors, dispersants, biocides, bio-dispersants and pH control – with typical uses.
Corrosion Inhibitors for Cooling Towers: Types & Dosage
Corrosion inhibitors for cooling towers and closed loops – phosphonate-zinc, azoles, molybdate and nitrite – how they work and typical dosage.