Quick answer: Clean RO membranes when normalised permeate flow drops 10–15%, salt passage rises 5–10% or differential pressure rises 15%. Use an alkaline cleaner (pH 11–12) first for organics and biofilm, then an acid cleaner such as citric acid (pH 2–3) for scale and iron.
Cleaning chemicals
| Foulant | Cleaner |
|---|---|
| Calcium carbonate scale | Citric acid 1–2%, pH 2–3 |
| Iron / metal oxides | Citric acid or formulated acid cleaner |
| Organics, biofilm | Alkaline cleaner pH 11–12 |
| Silica | Speciality alkaline cleaner |
CIP procedure
- Flush with permeate at low pressure.
- Recirculate cleaning solution 30–60 min at 30–35 °C.
- Soak 1–8 hours for heavy fouling.
- Recirculate again, then flush until pH is neutral.
- Restart and record normalised data.
Prevention is cheaper – see the RO antiscalant guide and citric acid cleaning.
Frequently asked questions
Which chemical is used for RO membrane cleaning?
Alkaline cleaners for organics and biofilm, and acid cleaners such as citric acid for scale and iron.
How often should RO membranes be cleaned?
Typically every 3–12 months, when performance drops beyond the normal trigger limits.
Products in this guide
Citric Acid Monohydrate
Citric Acid Monohydrate is a weak organic acid and chelating agent used for low-pH cleaning of RO/UF membranes (removing…
Related articles
RO Antiscalant: What It Is, Dosage Calculation & How to Choose
What an RO antiscalant does, how to calculate antiscalant dosage for reverse osmosis plants, and how to choose the right one for high TDS, silica or sulfate scaling.
Citric Acid for RO Membrane Cleaning & Industrial Descaling
Using citric acid monohydrate to clean RO membranes and descale boilers and heat exchangers – concentration, pH and procedure.