Quick answer: Citric acid monohydrate is a mild organic acid that dissolves carbonate scale and chelates iron. For RO cleaning use a 1–2% solution adjusted to pH 2–3 at 30–35 °C; for heat-exchanger descaling, 3–5% solutions are common.
Why citric acid?
- Safe for polyamide membranes
- Chelates iron to prevent re-deposition
- Biodegradable and low hazard
- Food-grade available
Preparing a 2% RO cleaning solution
For 500 L of solution, dissolve 10 kg of citric acid monohydrate in RO permeate and adjust pH to 2–3 with ammonia if needed.
Follow the full RO membrane cleaning procedure.
Frequently asked questions
Can citric acid clean RO membranes?
Yes – a 1–2% citric acid solution at pH 2–3 is a standard acid clean for carbonate scale and iron.
Is citric acid good for descaling?
Yes, it is a mild, safe descaler for boilers, heat exchangers and cooling systems.
Products in this guide
Citric Acid Monohydrate
Citric Acid Monohydrate is a weak organic acid and chelating agent used for low-pH cleaning of RO/UF membranes (removing…
Related articles
RO Membrane Cleaning: Chemicals & Step-by-Step CIP Procedure
When to clean RO membranes, which acid and alkaline cleaning chemicals to use, and a step-by-step clean-in-place (CIP) procedure.
RO Antiscalant: What It Is, Dosage Calculation & How to Choose
What an RO antiscalant does, how to calculate antiscalant dosage for reverse osmosis plants, and how to choose the right one for high TDS, silica or sulfate scaling.