ISO 9001 · 14001 · 22000 certified🚚 Pan-India dispatch from Vadodara
General guides

Reading a Polymer COA: Solid Content, pH, Density, Free Monomer & Viscosity Explained

How to read a Certificate of Analysis for water treatment polymers: what each parameter means, test methods, acceptable ranges and how to use COA values to compare suppliers.

By ZEEL PRODUCT Technical TeamPublished 2026-10-08Updated 2026-11-203 min read
Quick answer: A water treatment polymer COA usually reports appearance, solid content (active indicator), pH of a 1 % solution, density, free monomer and sometimes viscosity, molecular weight and bromine value (for HPMA). Solid content and free monomer matter most for comparing value and quality.

Key COA parameters

ParameterWhat it tells youTypical method
Appearance / colourContamination or oxidationVisual, APHA
Solid contentActive polymer level; basis for dose and priceOven drying at 105–120 °C
pH (1 %)Acid or salt form; consistencypH meter
DensityQuick check of concentrationHydrometer at 20 °C
Free monomerCompleteness of polymerisation; safetyBromination titration / HPLC
ViscosityIndirect check of molecular weightBrookfield
Bromine value (HPMA)Residual unsaturationBromination

Why solid content matters most

Price and dose should be judged on active polymer. Cost per active kg = price ÷ (solids ÷ 100). Example: ZEELCHEM™ 1000 at ≥ 48 % against a 40 % product. You need 20 % more of the lower-solids product for the same active dose.

Free monomer

Residual acrylic or maleic acid has no scale-inhibiting value and adds odour and hazard. Low free monomer (≤ 0.5 % for PAA) indicates good process control.

How to check a delivery

  1. Match the batch number on the label with the COA.
  2. Check appearance and smell.
  3. Measure density and pH (1 %). This is quick, cheap and catches most substitution problems.
  4. Send a retained sample for solids testing periodically.

ZEEL PRODUCT documentation

Every ZEELCHEM™ dispatch includes a batch COA, with TDS and GHS MSDS available for all six polymers. Ask on the contact page, or see our corporate site for the full document library.

FAQ

What is the most important COA value?

Solid content, because it determines active dose and true cost.

Why test pH at 1 %?

Neat polymer pH readings are unreliable; a 1 % solution gives a consistent comparison.

Does density confirm solids?

Roughly. It is a quick check, but oven solids is definitive.

ZP
ZEEL PRODUCT Technical Team
Water treatment chemists at ZEEL PRODUCT, Vadodara. ISO 9001:2015 certified manufacturer of ZEELCHEM™ polymers.

More from ZEEL PRODUCT: zeelproduct.com · zeelproduct.net · ZEELCHEM™ range · online shop · zeelproductonline.co.in

Related articles

Need a polymer for your water system?

Share your water analysis and system details. Our technical team will recommend the right ZEELCHEM™ polymer and dosage, and send today's price with TDS, MSDS and COA.