What is Polymaleic Acid (HPMA) ZEELCHEM™ 200?
ZEELCHEM™ 200 is hydrolysed polymaleic anhydride (HPMA), also called polymaleic acid. It is a very low molecular weight polymer with two carboxylic groups on every repeat unit, so its charge density is about twice that of polyacrylic acid. HPMA is the polymer of choice when water is hot, highly alkaline or highly concentrated. It keeps its threshold effect for calcium carbonate and calcium sulphate at temperatures where most other polymers lose efficiency.
Typical users are low and medium pressure boilers, MSF and MED thermal desalination, sugar and paper mill evaporators, crude oil dehydration and oilfield injection water, and cooling systems running at high cycles with high alkalinity. ZEELCHEM™ 200 is manufactured by ZEEL PRODUCT in Vadodara and supplied pan-India in 60 kg HDPE carboys and 240 kg HDPE barrels.

Technical specifications
| Parameter | Typical value |
|---|---|
| Appearance | Light yellow to amber, clear liquid |
| Chemical name | Hydrolysed polymaleic anhydride (polymaleic acid) |
| Solid content | ≥ 48.0 % |
| Bromine value | ≤ 80 mg/g |
| pH (1 % aqueous solution) | 2.0 – 3.0 |
| Density at 20 °C | ≥ 1.18 g/cm³ |
| Average molecular weight | 400 – 800 |
| Thermal stability | Threshold activity retained up to ~300 °C |
| CAS No. | 26099-09-2 |
| HS Code | 3911 90 90 |
Specifications are typical values. Exact results for each batch are given in the Certificate of Analysis (COA) supplied with every dispatch.
Polymaleic Acid (HPMA) chemical structure – 3D models
3D ball-and-stick models of the HPMA repeat unit and polymer chain ((C₄H₄O₄)ₙ). Carbon is grey, oxygen red, hydrogen white. Click any image to open it at full size.





How HPMA works: mechanism of action

HPMA's short chains are packed with carboxylate groups (two per maleic unit). This gives it three advantages:
- Strong lattice poisoning. The dense negative charge binds strongly to Ca²⁺ sites on calcite and gypsum nuclei, so crystal growth stops at the micro-crystal stage, even at high supersaturation.
- Thermal resistance. The polymer backbone resists hydrolytic and thermal breakdown. It stays effective in boiler water, on evaporator tubes and in brine heaters where polyacrylates start to degrade.
- Tolerance of alkalinity. HPMA keeps working above pH 8.5 and at high M-alkalinity, which suits alkaline cooling programs that run without acid feed.
Because its molecules are small, HPMA is a weaker dispersant than PAA or AA/AMPS. Formulators often pair it with ZEELCHEM™ 3100 or ZEELCHEM™ 1000 when iron or silt is also present.
Relative performance profile
Relative index based on typical laboratory static-jar results and field experience, for comparison within the ZEELCHEM™ range. It is not an absolute guarantee of performance.
Applications of Polymaleic Acid (HPMA)
Low & medium pressure boilers
Scale inhibitor in internal treatment; keeps hardness from depositing on hot tube surfaces.
MSF / MED thermal desalination
Controls alkaline scale (CaCO₃, Mg(OH)₂) in brine heaters and evaporator stages.
Sugar mill & paper mill evaporators
Reduces calcium salt deposits on evaporator tubes, extending the time between cleanings.
Oilfield & crude oil dehydration
Scale inhibitor for injection water, produced water and heater treaters.
High-alkalinity cooling towers
Runs alkaline programs at higher cycles without sulphuric acid feed.
Detergents & dyeing
Builder/sequestrant and anti-scaling aid in high-temperature textile baths.
Recommended dosage
| Application | Typical dosage |
|---|---|
| Boiler internal treatment | 2 – 8 mg/L in feed water |
| Cooling tower (alkaline program) | 3 – 12 mg/L as product |
| MSF/MED desalination | 2 – 6 mg/L in make-up seawater |
| Sugar evaporator | 3 – 10 mg/L on juice (ppm on juice weight) |
| Oilfield injection water | 5 – 30 mg/L, based on scaling tendency |
Calculate the daily product requirement for your cooling tower or process flow with our free dosage calculator. Final dosage should be set from a water analysis and monitored through residual polymer, hardness and cycles of concentration.
Key benefits
- Stays active at high temperature (up to ~300 °C)
- Excellent in high pH and high alkalinity water
- Strong calcium carbonate and sulphate inhibition
- Synergy with phosphonates and other polymers
- Low dosage, which lowers program cost
- Phosphorus-free, so it fits low-P programs
Formulation & synergy
ZEELCHEM™ 200 is fully compatible with the other ZEELCHEM™ polymers and with phosphonates (HEDP, ATMP, PBTC), zinc salts, molybdate, azoles (BTA, TTA) and oxidising and non-oxidising biocides at use concentrations. Combining a polymer with a phosphonate usually gives a synergistic effect: the blend performs better than either component alone at the same total dose.
Related polymers: ZEELCHEM™ 1000 Polyacrylic Acid, ZEELCHEM™ 3000 Co-polymer of MA/AA, ZEELCHEM™ 7000 Terpolymer. For phosphonates, biocides, corrosion inhibitors and ready RO antiscalants, see the ZEELCHEM™ product range and zeelproduct.net.
Storage, handling & safety
Storage: Store in HDPE containers in a cool, shaded, ventilated place (5 °C – 40 °C). Keep containers tightly closed. Acidic, so avoid unlined mild steel and copper. Handle with PP, PVDF or SS316 dosing equipment. Shelf life is 12 months in unopened original packing.
Safety: Acidic liquid (pH 2–3). Irritating to eyes and skin. Wear goggles, gloves and protective clothing. In case of eye contact, rinse immediately with water for at least 15 minutes and seek medical advice. Refer to the ZEELCHEM™ 200 MSDS.
Packing
60 kg HDPE carboy and 240 kg HDPE barrel.
TDS, MSDS & COA
Every order of ZEELCHEM™ 200 ships with a Technical Data Sheet (TDS), a GHS-compliant Material Safety Data Sheet (MSDS/SDS) and a batch Certificate of Analysis (COA), ready for vendor registration, ISO and EHS audits. To get the TDS and MSDS before ordering, send an enquiry or message us on WhatsApp.
Supply across India
ZEEL PRODUCT dispatches ZEELCHEM™ 200 Polymaleic Acid (HPMA) from Vadodara, Gujarat to Vadodara, Ahmedabad, Surat, Ankleshwar, Bharuch, Vapi, Rajkot, Morbi, Mumbai, Pune, Delhi NCR, Chennai, Hyderabad, Bengaluru, Kolkata, Indore and all over India. Gujarat orders usually reach within 1–3 days and other states within 3–7 days by road transport. See the pan-India supply network.
Frequently asked questions
What is HPMA used for?
HPMA (hydrolysed polymaleic anhydride) is a scale inhibitor mainly for high-temperature and high-alkalinity systems: boilers, thermal desalination, evaporators, oilfield water and alkaline cooling towers.
What is the difference between HPMA and polyacrylic acid?
HPMA has two carboxyl groups per unit and a very low molecular weight. That makes it stronger against scale at high temperature and pH. PAA is a better dispersant and usually cheaper for normal cooling tower conditions.
Up to what temperature is HPMA effective?
HPMA keeps its threshold inhibition up to about 300 °C, so it is used in boilers and brine heaters.
What does bromine value mean in HPMA?
Bromine value measures residual unsaturation (unreacted maleic double bonds). A low value (≤ 80 mg/g) indicates good polymerisation and stable product quality.
Is HPMA available in bulk?
Yes. ZEELCHEM™ 200 is available in 60 kg HDPE carboys and 240 kg HDPE barrels, with pan-India dispatch from Vadodara.


