What is Terpolymer ZEELCHEM™ 7000?
ZEELCHEM™ 7000 is a terpolymer built from three monomers. A carboxylic monomer (acrylic acid) gives threshold inhibition. A sulphonic monomer (AMPS) gives calcium tolerance and phosphate/zinc stabilisation. A nonionic monomer (hydroxy-ester type) gives extra adsorption and dispersion on particulate surfaces.
With three functional groups on one chain, the terpolymer controls calcium carbonate, calcium phosphate, zinc, iron, manganese and silt at the same time. It is the premium choice for high-cycle, high-pH cooling towers, all-organic and stabilised phosphate programs, and plants that want to cut blowdown and save water. ZEEL PRODUCT manufactures ZEELCHEM™ 7000 in Vadodara for supply across India.

Technical specifications
| Parameter | Typical value |
|---|---|
| Appearance | Colourless to light yellow, clear liquid |
| Chemical type | Carboxylate / sulphonate / nonionic terpolymer |
| Solid content | ≥ 30.0 % |
| Free monomer | ≤ 0.50 % |
| pH (1 % aqueous solution) | 2.0 – 3.0 |
| Density at 20 °C | ≥ 1.15 g/cm³ |
| Average molecular weight | 4,000 – 10,000 |
| Calcium tolerance | Excellent |
| CAS No. | Mixture – refer MSDS |
| HS Code | 3906 90 90 |
Specifications are typical values. Exact results for each batch are given in the Certificate of Analysis (COA) supplied with every dispatch.
Terpolymer chemical structure – 3D models
3D ball-and-stick models of the Terpolymer repeat unit and polymer chain (AA / AMPS / nonionic monomer). Carbon is grey, oxygen red, hydrogen white, nitrogen blue, sulphur yellow. Click any image to open it at full size.





How Terpolymer works: mechanism of action

Each monomer in ZEELCHEM™ 7000 does a specific job:
- Carboxylate (–COO⁻): threshold inhibition and crystal distortion for CaCO₃ and CaSO₄.
- Sulphonate (–SO₃⁻): calcium tolerance at high pH and hardness, plus stabilisation of calcium phosphate and zinc hydroxide/phosphate.
- Nonionic segment: extra adsorption on particle surfaces through hydrogen bonding and steric effects. This improves dispersion of iron oxide, clay and organics, and helps against fouling where charge alone is not enough.
Because all three effects sit on the same chain, the terpolymer often matches or beats a blend of two separate polymers, at lower total dose.
Relative performance profile
Relative index based on typical laboratory static-jar results and field experience, for comparison within the ZEELCHEM™ range. It is not an absolute guarantee of performance.
Applications of Terpolymer
High-cycle / zero-blowdown cooling towers
Runs at 6–10+ cycles of concentration to save make-up water.
Stabilised phosphate & zinc programs
Controls calcium phosphate scale while phosphate and zinc protect steel.
All-organic (non-phosphorus) programs
Polymer core with PBTC and azoles for low-P discharge rules.
Power plants, refineries, fertiliser & steel
Heavy-duty cooling circuits with high heat flux and poor make-up water.
RO antiscalant formulations
Premium polymer for phosphate, silica and metal-oxide control.
Closed cooling loops
Long-term dispersant.
Recommended dosage
| Application | Typical dosage |
|---|---|
| High-stress cooling tower | 3 – 20 mg/L as product |
| Stabilised phosphate program | 1.5 – 2.5 mg/L product per mg/L PO₄ |
| All-organic program | 20 – 35 % of formulation |
| RO antiscalant formulation | 10 – 25 % of formulation |
| Closed loops | 10 – 30 mg/L |
Calculate the daily product requirement for your cooling tower or process flow with our free dosage calculator. Final dosage should be set from a water analysis and monitored through residual polymer, hardness and cycles of concentration.
Key benefits
- One polymer controls carbonate, phosphate, zinc and iron
- Allows higher cycles, less blowdown, water saving
- Excellent at high pH and hardness
- Supports non-phosphorus green programs
- Thermal and chlorine stable
- Lower total polymer dose than blends
Formulation & synergy
ZEELCHEM™ 7000 is fully compatible with the other ZEELCHEM™ polymers and with phosphonates (HEDP, ATMP, PBTC), zinc salts, molybdate, azoles (BTA, TTA) and oxidising and non-oxidising biocides at use concentrations. Combining a polymer with a phosphonate usually gives a synergistic effect: the blend performs better than either component alone at the same total dose.
Related polymers: ZEELCHEM™ 3100 Co-polymer of AA/AMPS, ZEELCHEM™ 1000 Polyacrylic Acid, ZEELCHEM™ 200 Polymaleic Acid (HPMA). For phosphonates, biocides, corrosion inhibitors and ready RO antiscalants, see the ZEELCHEM™ product range and zeelproduct.net.
Storage, handling & safety
Storage: Store in closed HDPE containers at 5 °C – 40 °C, protected from sunlight and frost. Use HDPE, PP, PVC or SS316 for handling. Shelf life is 12 months in original sealed packing.
Safety: Mildly acidic; may cause eye and skin irritation. Use goggles and gloves. Rinse with water on contact. See the ZEELCHEM™ 7000 MSDS.
Packing
65 kg HDPE carboy and 260 kg HDPE barrel.
TDS, MSDS & COA
Every order of ZEELCHEM™ 7000 ships with a Technical Data Sheet (TDS), a GHS-compliant Material Safety Data Sheet (MSDS/SDS) and a batch Certificate of Analysis (COA), ready for vendor registration, ISO and EHS audits. To get the TDS and MSDS before ordering, send an enquiry or message us on WhatsApp.
Supply across India
ZEEL PRODUCT dispatches ZEELCHEM™ 7000 Terpolymer from Vadodara, Gujarat to Vadodara, Ahmedabad, Surat, Ankleshwar, Bharuch, Vapi, Rajkot, Morbi, Mumbai, Pune, Delhi NCR, Chennai, Hyderabad, Bengaluru, Kolkata, Indore and all over India. Gujarat orders usually reach within 1–3 days and other states within 3–7 days by road transport. See the pan-India supply network.
Frequently asked questions
What is a terpolymer in water treatment?
A polymer made from three different monomers, typically carboxylic, sulphonic and nonionic. Together they give scale inhibition, calcium tolerance, phosphate/zinc stabilisation and dispersion in one product.
When do I need a terpolymer instead of a copolymer?
Use a terpolymer when the system has several problems at once, such as phosphate, zinc, iron and high pH, or when you want to run at high cycles of concentration.
Can ZEELCHEM™ 7000 be used in non-phosphorus programs?
Yes. Combined with PBTC and azoles, it forms the polymer core of all-organic, low-phosphorus cooling water programs.
What is the typical dose of terpolymer?
3–20 mg/L as product in recirculating water, or 1.5–2.5 mg/L product for every mg/L of orthophosphate in phosphate programs.
Is ZEELCHEM™ 7000 available pan-India?
Yes. It is dispatched from Vadodara to all Indian states in 65 kg HDPE carboys and 260 kg HDPE barrels.


