What is Co-polymer of AA/AMPS ZEELCHEM™ 3100?
ZEELCHEM™ 3100 is a copolymer of acrylic acid and 2-acrylamido-2-methylpropane sulphonic acid (AA/AMPS). The strongly acidic sulphonate group stays ionised at any pH and does not form insoluble salts with calcium. That makes AA/AMPS one of the most effective polymers for calcium phosphate inhibition, zinc stabilisation and iron/manganese dispersion. These are the deposits that ordinary polyacrylates cannot control.
AA/AMPS is the backbone of modern phosphate and zinc-phosphate cooling water programs, high-cycle and high-pH alkaline programs, and many RO antiscalant formulations. ZEEL PRODUCT supplies ZEELCHEM™ 3100 from Vadodara to customers all over India.

Technical specifications
| Parameter | Typical value |
|---|---|
| Appearance | Colourless to light yellow, clear liquid |
| Chemical name | Copolymer of acrylic acid and 2-acrylamido-2-methylpropane sulphonic acid |
| Solid content | ≥ 30.0 % |
| Free monomer (as acrylic acid) | ≤ 0.50 % |
| pH (1 % aqueous solution) | 2.5 – 3.5 |
| Density at 20 °C | ≥ 1.15 g/cm³ |
| Average molecular weight | 5,000 – 12,000 |
| Calcium tolerance | Very high; stable in hard water |
| CAS No. | 40623-75-4 |
| HS Code | 3906 90 90 |
Specifications are typical values. Exact results for each batch are given in the Certificate of Analysis (COA) supplied with every dispatch.
Co-polymer of AA/AMPS chemical structure – 3D models
3D ball-and-stick models of the AA/AMPS repeat unit and polymer chain ((C₃H₄O₂)ₘ(C₇H₁₃NO₄S)ₙ). Carbon is grey, oxygen red, hydrogen white, nitrogen blue, sulphur yellow. Click any image to open it at full size.





How AA/AMPS works: mechanism of action

The sulphonate group (–SO₃⁻) of AMPS is the key to this polymer's performance:
- No calcium precipitation. Sulphonates stay ionised and soluble even in very hard water. The polymer therefore remains in solution to do its work, while carboxylate-only polymers can precipitate as calcium salts.
- Calcium phosphate inhibition. AA/AMPS adsorbs on Ca₃(PO₄)₂ and hydroxyapatite nuclei and stops their growth. This lets phosphate corrosion inhibitors work without turning into scale.
- Zinc and iron stabilisation. It keeps Zn²⁺ soluble at pH 7.5–8.5 so zinc stays available for corrosion protection. It also disperses iron and manganese oxides so they do not foul exchangers.
- Silica control. It reduces magnesium silicate and colloidal silica deposits in high-silica make-up water.
* Laboratory static test under standard conditions (e.g. 250 mg/L Ca²⁺, 10 mg/L PO₄³⁻, pH 8.5–9.0, 80 °C). Field performance depends on water chemistry and system design.
Relative performance profile
Relative index based on typical laboratory static-jar results and field experience, for comparison within the ZEELCHEM™ range. It is not an absolute guarantee of performance.
Applications of Co-polymer of AA/AMPS
Phosphate & zinc-phosphate cooling programs
Prevents calcium phosphate scale and stabilises zinc for corrosion control.
High-pH / high-cycle cooling towers
Lets systems run at higher cycles of concentration to save water.
Iron-rich make-up water
Disperses iron and manganese oxides and corrosion products.
RO / NF antiscalant formulations
Controls calcium phosphate, silica and metal oxide fouling of membranes.
Closed loops & chillers
Dispersant to keep heat-transfer surfaces clean.
Oilfield & mining water
Scale and dispersant for high-TDS water.
Recommended dosage
| Application | Typical dosage |
|---|---|
| Phosphate cooling program | 5 – 20 mg/L as product (1 – 2 mg/L polymer per mg/L PO₄) |
| Alkaline high-cycle program | 3 – 12 mg/L as product |
| Iron dispersion | 2 – 5 mg/L polymer per mg/L Fe |
| RO antiscalant formulation | 10 – 25 % of formulation |
| Closed loops | 10 – 30 mg/L |
Calculate the daily product requirement for your cooling tower or process flow with our free dosage calculator. Final dosage should be set from a water analysis and monitored through residual polymer, hardness and cycles of concentration.
Key benefits
- Outstanding calcium phosphate scale inhibition
- Stabilises zinc for corrosion protection
- Disperses iron, manganese and silt
- Very high calcium tolerance at high pH
- Enables higher cycles of concentration
- Thermally and chlorine stable
Formulation & synergy
ZEELCHEM™ 3100 is fully compatible with the other ZEELCHEM™ polymers and with phosphonates (HEDP, ATMP, PBTC), zinc salts, molybdate, azoles (BTA, TTA) and oxidising and non-oxidising biocides at use concentrations. Combining a polymer with a phosphonate usually gives a synergistic effect: the blend performs better than either component alone at the same total dose.
Related polymers: ZEELCHEM™ 7000 Terpolymer, ZEELCHEM™ 1000 Polyacrylic Acid, ZEELCHEM™ 3000 Co-polymer of MA/AA. For phosphonates, biocides, corrosion inhibitors and ready RO antiscalants, see the ZEELCHEM™ product range and zeelproduct.net.
Storage, handling & safety
Storage: Store in closed HDPE containers at 5 °C – 40 °C, away from direct sunlight and freezing. Acidic, so use non-metallic or SS316 equipment. Shelf life is 12 months in original sealed packing.
Safety: Mildly acidic; may irritate eyes and skin. Wear goggles and gloves. Rinse with water on contact. Refer to the ZEELCHEM™ 3100 MSDS.
Packing
60 kg HDPE carboy and 240 kg HDPE barrel.
TDS, MSDS & COA
Every order of ZEELCHEM™ 3100 ships with a Technical Data Sheet (TDS), a GHS-compliant Material Safety Data Sheet (MSDS/SDS) and a batch Certificate of Analysis (COA), ready for vendor registration, ISO and EHS audits. To get the TDS and MSDS before ordering, send an enquiry or message us on WhatsApp.
Supply across India
ZEEL PRODUCT dispatches ZEELCHEM™ 3100 Co-polymer of AA/AMPS from Vadodara, Gujarat to Vadodara, Ahmedabad, Surat, Ankleshwar, Bharuch, Vapi, Rajkot, Morbi, Mumbai, Pune, Delhi NCR, Chennai, Hyderabad, Bengaluru, Kolkata, Indore and all over India. Gujarat orders usually reach within 1–3 days and other states within 3–7 days by road transport. See the pan-India supply network.
Frequently asked questions
What is AA/AMPS copolymer used for?
It is used mainly to inhibit calcium phosphate scale, stabilise zinc, and disperse iron, manganese and silica in cooling water, RO and closed loops.
Why is AMPS better for calcium phosphate?
The sulphonate group of AMPS stays ionised and does not precipitate with calcium, so the polymer stays active in hard, high-pH water where phosphate scale forms.
What is the active content of ZEELCHEM™ 3100?
Typically ≥ 30 % solids. Always calculate the dose on the as-supplied product and the solids content given on the COA.
Can AA/AMPS replace phosphonates?
Not fully. AA/AMPS is a dispersant and phosphate/zinc stabiliser; phosphonates give strong CaCO₃ threshold inhibition. They work best together.
Do you supply AA/AMPS outside Gujarat?
Yes. ZEEL PRODUCT ships ZEELCHEM™ 3100 to all states of India, including Maharashtra, Tamil Nadu, Karnataka, Telangana, Uttar Pradesh and West Bengal.


