What is Co-polymer of MA/AA ZEELCHEM™ 3000?
ZEELCHEM™ 3000 is a copolymer of maleic acid and acrylic acid (MA/AA). The maleic units add charge density and temperature tolerance, much like HPMA. The acrylic units add chain length and dispersing power, much like PAA. The result is a balanced polymer that controls calcium carbonate scale in hard, high-alkalinity water and keeps suspended solids moving.
MA/AA is a favourite base for cooling water programs that run at high pH without acid, for boiler and evaporator treatment, and, as the neutralised sodium salt, as a phosphate-free builder and anti-redeposition agent in detergents. ZEEL PRODUCT manufactures ZEELCHEM™ 3000 in Vadodara, Gujarat, for supply across India.

Technical specifications
| Parameter | Typical value |
|---|---|
| Appearance | Light yellow to amber, clear liquid |
| Chemical name | Copolymer of maleic acid and acrylic acid |
| Solid content | ≥ 48.0 % |
| Free monomer (as maleic acid) | ≤ 1.0 % |
| pH (1 % aqueous solution) | 2.0 – 3.0 |
| Density at 20 °C | ≥ 1.18 g/cm³ |
| Average molecular weight | 3,000 – 5,000 |
| Calcium tolerance | Excellent; stable in high-hardness water |
| CAS No. | 26677-99-6 |
| HS Code | 3906 90 90 |
Specifications are typical values. Exact results for each batch are given in the Certificate of Analysis (COA) supplied with every dispatch.
Co-polymer of MA/AA chemical structure – 3D models
3D ball-and-stick models of the MA/AA repeat unit and polymer chain ((C₄H₄O₄)ₘ(C₃H₄O₂)ₙ). Carbon is grey, oxygen red, hydrogen white. Click any image to open it at full size.





How MA/AA works: mechanism of action

MA/AA uses both its monomer types:
- Maleic segments place two carboxyl groups close together. These bind strongly to calcium sites on carbonate nuclei and hold their activity at higher temperature and pH.
- Acrylic segments give a longer, flexible backbone. It adsorbs on particles and spreads negative charge for electrostatic dispersion.
- High calcium tolerance. In very hard water, a pure polyacrylate can form an insoluble calcium–polymer salt and lose efficiency. The copolymer structure resists this "polymer precipitation", so performance holds at high calcium.
Relative performance profile
Relative index based on typical laboratory static-jar results and field experience, for comparison within the ZEELCHEM™ range. It is not an absolute guarantee of performance.
Applications of Co-polymer of MA/AA
High-alkalinity cooling towers
Alkaline/non-acid programs at high pH and hardness; base polymer with HEDP/PBTC.
Boilers & evaporators
Scale and sludge control with good thermal stability.
Detergent powders & liquids
Phosphate-free builder co-agent, anti-redeposition and anti-encrustation polymer (after neutralisation).
Textile pre-treatment
Sequestrant and dispersant in scouring and bleaching to prevent Ca/Mg deposits.
RO antiscalant blends
Polymer partner for CaCO₃ control in high-hardness feed water.
Industrial & CIP cleaning
Anti-scaling aid in alkaline cleaners.
Recommended dosage
| Application | Typical dosage |
|---|---|
| Cooling tower (continuous) | 2 – 15 mg/L as product |
| Phosphonate–copolymer blend | 20 – 40 % of formulation |
| Boiler / evaporator | 3 – 10 mg/L |
| Detergent powder (as Na salt) | 1 – 5 % of formulation |
| Textile bath | 0.5 – 2 g/L |
Calculate the daily product requirement for your cooling tower or process flow with our free dosage calculator. Final dosage should be set from a water analysis and monitored through residual polymer, hardness and cycles of concentration.
Key benefits
- Excellent CaCO₃ inhibition in hard, alkaline water
- High calcium tolerance; no polymer drop-out
- Good dispersion of suspended solids
- Phosphate-free detergent builder co-agent
- Good thermal stability for boilers
- Fully compatible with phosphonates and zinc
Formulation & synergy
ZEELCHEM™ 3000 is fully compatible with the other ZEELCHEM™ polymers and with phosphonates (HEDP, ATMP, PBTC), zinc salts, molybdate, azoles (BTA, TTA) and oxidising and non-oxidising biocides at use concentrations. Combining a polymer with a phosphonate usually gives a synergistic effect: the blend performs better than either component alone at the same total dose.
Related polymers: ZEELCHEM™ 200 Polymaleic Acid (HPMA), ZEELCHEM™ 1000 Polyacrylic Acid, ZEELCHEM™ 3100 Co-polymer of AA/AMPS. For phosphonates, biocides, corrosion inhibitors and ready RO antiscalants, see the ZEELCHEM™ product range and zeelproduct.net.
Storage, handling & safety
Storage: Store at 5 °C – 40 °C in closed HDPE containers, away from direct sunlight. The acid form is corrosive to mild steel and copper, so use HDPE, PP or SS316 equipment. Shelf life is 12 months in original sealed packing.
Safety: Acidic (pH 2–3); eye and skin irritant. Use goggles, gloves and protective clothing. Flush exposed skin or eyes with water for 15 minutes. See the ZEELCHEM™ 3000 MSDS for details.
Packing
60 kg HDPE carboy and 240 kg HDPE barrel.
TDS, MSDS & COA
Every order of ZEELCHEM™ 3000 ships with a Technical Data Sheet (TDS), a GHS-compliant Material Safety Data Sheet (MSDS/SDS) and a batch Certificate of Analysis (COA), ready for vendor registration, ISO and EHS audits. To get the TDS and MSDS before ordering, send an enquiry or message us on WhatsApp.
Supply across India
ZEEL PRODUCT dispatches ZEELCHEM™ 3000 Co-polymer of MA/AA from Vadodara, Gujarat to Vadodara, Ahmedabad, Surat, Ankleshwar, Bharuch, Vapi, Rajkot, Morbi, Mumbai, Pune, Delhi NCR, Chennai, Hyderabad, Bengaluru, Kolkata, Indore and all over India. Gujarat orders usually reach within 1–3 days and other states within 3–7 days by road transport. See the pan-India supply network.
Frequently asked questions
What is MA/AA copolymer?
It is a copolymer of maleic acid and acrylic acid used as a scale inhibitor and dispersant, especially in hard, high-alkalinity water and in detergents.
When should I use MA/AA instead of polyacrylic acid?
Choose MA/AA when the water has high hardness, high alkalinity or a high pH and you run without acid dosing. PAA can lose efficiency or precipitate with calcium in those conditions.
Can MA/AA be used in detergents?
Yes. After neutralisation to the sodium salt, MA/AA is a widely used phosphate-free co-builder that prevents encrustation and soil redeposition.
What dose of MA/AA is typical in a cooling tower?
2–15 mg/L as product, depending on hardness, alkalinity, cycles of concentration and the other components in the program.
What packing is available for ZEELCHEM™ 3000?
60 kg HDPE carboys and 240 kg HDPE barrels, supplied pan-India from Vadodara.


