What is Sodium Polyacrylate Liquid ZEELCHEM™ 1000.S7?
ZEELCHEM™ 1000.S7 is a low molecular weight sodium polyacrylate liquid, the neutralised sodium salt of polyacrylic acid. With a near-neutral pH, it gives the dispersing and scale-control power of polyacrylate without the handling issues of an acid. It is safer for operators, easier on mild steel equipment, and can be added directly to pH-sensitive processes.
Besides water treatment, sodium polyacrylate is one of the most widely used industrial dispersants and deflocculants. It lowers the viscosity of ceramic slips, calcium carbonate, kaolin and TiO₂ slurries, paper coating colours, paints and detergent slurries, so they run at higher solids with less water and energy. ZEEL PRODUCT manufactures ZEELCHEM™ 1000.S7 in Vadodara, Gujarat, and supplies it pan-India.

Technical specifications
| Parameter | Typical value |
|---|---|
| Appearance | Colourless to pale yellow, clear liquid |
| Chemical name | Sodium polyacrylate (sodium salt of polyacrylic acid) |
| Solid content | 40.0 – 45.0 % |
| pH (1 % aqueous solution) | 6.0 – 8.0 |
| Density at 20 °C | ≥ 1.25 g/cm³ |
| Free monomer | ≤ 0.50 % |
| Average molecular weight | 3,000 – 8,000 |
| Solubility | Completely miscible with water |
| CAS No. | 9003-04-7 |
| HS Code | 3906 90 90 |
Specifications are typical values. Exact results for each batch are given in the Certificate of Analysis (COA) supplied with every dispatch.
Sodium Polyacrylate Liquid chemical structure – 3D models
3D ball-and-stick models of the NaPA repeat unit and polymer chain ((C₃H₃NaO₂)ₙ). Carbon is grey, oxygen red, hydrogen white, sodium purple. Click any image to open it at full size.





How NaPA works: mechanism of action

Sodium polyacrylate chains carry many ionised carboxylate groups (–COO⁻ Na⁺):
- Electrostatic dispersion. The polymer adsorbs on particles (clay, CaCO₃, pigments, scale nuclei) and gives them a strong negative surface charge. Particles repel each other, so slurries flow and solids stay suspended.
- Deflocculation. In ceramic slips and mineral slurries, it breaks the "card-house" structure of clay platelets. Viscosity drops sharply, so higher solids content can be pumped.
- Threshold scale control. In water it inhibits CaCO₃ and CaSO₄ the same way PAA does, but at neutral pH. That makes it ideal for direct dosing into neutral process water.
Relative performance profile
Relative index based on typical laboratory static-jar results and field experience, for comparison within the ZEELCHEM™ range. It is not an absolute guarantee of performance.
Applications of Sodium Polyacrylate Liquid
Cooling & process water at neutral pH
Scale inhibitor and dispersant where acid products are not wanted.
Ceramic tiles & sanitaryware
Deflocculant for body slips and glazes; reduces water in spray drying.
CaCO₃, kaolin & TiO₂ slurries
Grinding aid and dispersant for high-solids slurries.
Paper coating & paints
Pigment dispersant for coating colours and water-based paints.
Detergents & cleaners
Anti-redeposition, anti-encrustation co-builder.
Mining, cement & textiles
Grinding aid, sequestrant and dispersant.
Recommended dosage
| Application | Typical dosage |
|---|---|
| Cooling / process water | 5 – 20 mg/L as product |
| Ceramic slip deflocculant | 0.2 – 0.8 % on dry clay |
| CaCO₃ / kaolin slurry | 0.3 – 1.2 % on dry pigment |
| Paper coating colour | 0.1 – 0.5 % on dry pigment |
| Detergent formulation | 1 – 4 % of formulation |
Calculate the daily product requirement for your cooling tower or process flow with our free dosage calculator. Final dosage should be set from a water analysis and monitored through residual polymer, hardness and cycles of concentration.
Key benefits
- Neutral pH, safer handling than acid PAA
- Strong dispersant and deflocculant
- Lower slurry viscosity at higher solids
- Reduces water and energy in drying
- Phosphate-free and non-toxic polymer
- Compatible with most process additives
Formulation & synergy
ZEELCHEM™ 1000.S7 is fully compatible with the other ZEELCHEM™ polymers and with phosphonates (HEDP, ATMP, PBTC), zinc salts, molybdate, azoles (BTA, TTA) and oxidising and non-oxidising biocides at use concentrations. Combining a polymer with a phosphonate usually gives a synergistic effect: the blend performs better than either component alone at the same total dose.
Related polymers: ZEELCHEM™ 1000 Polyacrylic Acid, ZEELCHEM™ 3000 Co-polymer of MA/AA, ZEELCHEM™ 3100 Co-polymer of AA/AMPS. For phosphonates, biocides, corrosion inhibitors and ready RO antiscalants, see the ZEELCHEM™ product range and zeelproduct.net.
Storage, handling & safety
Storage: Store in closed HDPE or mild steel lined containers at 5 °C – 40 °C. Protect from freezing. Neutral pH, so it can be handled with standard dosing equipment. Shelf life is 12 months in original sealed packing.
Safety: Near-neutral, low hazard. May cause mild eye irritation. Wear goggles and gloves as good practice. Wash with water on contact. Refer to the ZEELCHEM™ 1000.S7 MSDS.
Packing
60 kg HDPE carboy and 240 kg HDPE barrel.
TDS, MSDS & COA
Every order of ZEELCHEM™ 1000.S7 ships with a Technical Data Sheet (TDS), a GHS-compliant Material Safety Data Sheet (MSDS/SDS) and a batch Certificate of Analysis (COA), ready for vendor registration, ISO and EHS audits. To get the TDS and MSDS before ordering, send an enquiry or message us on WhatsApp.
Supply across India
ZEEL PRODUCT dispatches ZEELCHEM™ 1000.S7 Sodium Polyacrylate Liquid from Vadodara, Gujarat to Vadodara, Ahmedabad, Surat, Ankleshwar, Bharuch, Vapi, Rajkot, Morbi, Mumbai, Pune, Delhi NCR, Chennai, Hyderabad, Bengaluru, Kolkata, Indore and all over India. Gujarat orders usually reach within 1–3 days and other states within 3–7 days by road transport. See the pan-India supply network.
Frequently asked questions
What is sodium polyacrylate liquid used for?
It is used as a dispersant and scale inhibitor in water treatment, and as a deflocculant or dispersant for ceramics, CaCO₃/kaolin/pigment slurries, paper coating, paints and detergents.
What is the difference between ZEELCHEM™ 1000 and 1000.S7?
ZEELCHEM™ 1000 is acidic polyacrylic acid (pH 2–3). ZEELCHEM™ 1000.S7 is its neutralised sodium salt (pH 6–8), which is safer to handle and suits pH-sensitive processes.
Is this the same as super-absorbent sodium polyacrylate?
No. Super-absorbent polymer (SAP) is a cross-linked, very high molecular weight powder used in diapers. ZEELCHEM™ 1000.S7 is a low molecular weight, water-soluble liquid dispersant.
What dose is used as a ceramic deflocculant?
Typically 0.2–0.8 % on the weight of dry clay or body, optimised by viscosity (flow cup) tests.
Do you deliver sodium polyacrylate across India?
Yes. ZEELCHEM™ 1000.S7 ships from Vadodara to every state, including the ceramic clusters of Morbi, Thangadh and Khurja.


