ISO 9001 · 14001 · 22000 certified🚚 Pan-India dispatch from Vadodara
Sodium Polyacrylate Liquid

Sodium Polyacrylate Liquid: Complete Guide to Uses, Grades & Dosage

What low molecular weight sodium polyacrylate liquid is, how it disperses and deflocculates, specifications, applications in water treatment, ceramics, pigments, paper and detergents, and dosage.

By ZEEL PRODUCT Technical TeamPublished 2026-06-07Updated 2026-11-203 min read
Quick answer: Sodium polyacrylate liquid (ZEELCHEM™ 1000.S7, CAS 9003-04-7) is the neutral sodium salt of low molecular weight polyacrylic acid, supplied at 40–45 % solids and pH 6–8. It is a powerful dispersant, deflocculant and scale inhibitor, used at 0.1–1.2 % on solids in slurries and ceramics, and at 5–20 mg/L in water treatment.

What it is

Sodium polyacrylate is made by neutralising polyacrylic acid with caustic soda. The low molecular weight liquid grade is completely water-soluble. Do not confuse it with cross-linked super-absorbent powder; see liquid vs SAP.

Typical specifications – ZEELCHEM™ 1000.S7

ParameterValue
AppearanceColourless to pale yellow liquid
Solid content40 – 45 %
pH (1 %)6.0 – 8.0
Density≥ 1.25 g/cm³
Mw3,000 – 8,000

How it works

Its carboxylate groups adsorb onto particle surfaces and give them a high negative charge. The particles repel each other, so slurries flow at higher solids and dispersed particles stay suspended. In water, the same chemistry gives threshold scale inhibition of CaCO₃.

Applications

IndustryUseTypical dose
Ceramic tiles, sanitarywareSlip deflocculant0.2 – 0.8 % on dry body
CaCO₃ / kaolin / TiO₂Grinding aid, slurry dispersant0.3 – 1.2 % on dry pigment
Paper coating, paintsPigment dispersant0.1 – 0.5 % on pigment
DetergentsAnti-redeposition, co-builder1 – 4 %
Water treatmentScale inhibitor at neutral pH5 – 20 mg/L
Mining, cement, textilesDispersant, sequestrantProcess-specific

Read the application guides: ceramics, mineral slurries, paper & paints, mining, cement & textiles.

Why choose a neutral grade?

  • Safer for operators than acidic PAA.
  • Does not drop the pH of sensitive slurries.
  • Compatible with most metals and dosing equipment.

See PAA vs sodium polyacrylate and the ZEELCHEM™ 1000.S7 product page.

Sodium Polyacrylate Liquid (NaPA) 3D ball-and-stick molecular structure – ZEELCHEM™ 1000.S7 water treatment polymer by ZEEL PRODUCT, VadodaraFEATURED PRODUCT

ZEELCHEM™ 1000.S7 – Sodium Polyacrylate Liquid

Neutral-pH sodium polyacrylate dispersant for water treatment, ceramics, pigments, paper, detergents and mineral slurries.

FAQ

Is sodium polyacrylate liquid hazardous?

It has low hazard and a near-neutral pH. Normal PPE (goggles, gloves) is recommended.

What is the shelf life?

12 months in original sealed packing, stored at 5–40 °C.

Can it be used in food contact applications?

Only grades with specific regulatory approval should be used for food contact. Ask us before using it.

ZP
ZEEL PRODUCT Technical Team
Water treatment chemists at ZEEL PRODUCT, Vadodara. ISO 9001:2015 certified manufacturer of ZEELCHEM™ polymers.

More from ZEEL PRODUCT: zeelproduct.com · zeelproduct.net · ZEELCHEM™ range · online shop · zeelproductonline.co.in

Related articles

Need a polymer for your water system?

Share your water analysis and system details. Our technical team will recommend the right ZEELCHEM™ polymer and dosage, and send today's price with TDS, MSDS and COA.