ISO 9001 · 14001 · 22000 certified🚚 Pan-India dispatch from Vadodara
Sodium Polyacrylate Liquid

Dispersant for Calcium Carbonate, Kaolin & TiO₂ Slurries: Using Sodium Polyacrylate

How low MW sodium polyacrylate works as a grinding aid and dispersant for high-solids GCC/PCC, kaolin and TiO₂ slurries: dosage, viscosity control, stability and storage.

By ZEEL PRODUCT Technical TeamPublished 2026-07-05Updated 2026-11-203 min read
Quick answer: Low molecular weight sodium polyacrylate (ZEELCHEM™ 1000.S7) is the standard dispersant and grinding aid for high-solids mineral slurries. At about 0.3–1.2 % on dry pigment, it lets GCC slurries reach 72–78 % solids and kaolin 68–72 %, with low and stable Brookfield viscosity.

Why high-solids slurries need dispersants

Paper, paint, plastics and adhesive makers buy mineral fillers as slurries because they are easy to pump and meter. Shipping water costs money, so producers want maximum solids. Without a dispersant, fine particles agglomerate and the slurry becomes a paste at well below the target solids.

Typical dosage

MineralTarget solidsDose (% active on dry)
Ground calcium carbonate (GCC)72 – 78 %0.4 – 1.2 %
Precipitated calcium carbonate (PCC)65 – 72 %0.5 – 1.0 %
Kaolin / china clay68 – 72 %0.2 – 0.4 %
TiO₂70 – 76 %0.2 – 0.5 %

As a grinding aid

In wet grinding (bead mills), the polymer is added in stages. As new surface is created, more dispersant is needed to cover it, so dose rises with fineness. Under-dosing causes viscosity spikes and mill shutdowns.

Controlling quality

  • Measure Brookfield viscosity at 20 and 100 rpm right after production and after 7 days, to check for viscosity build-up.
  • Keep pH 8.5–10 for CaCO₃ slurries.
  • Prevent bacterial spoilage with a suitable preservative (see the ZEELCHEM™ biocide range).
  • Check water hardness, because high calcium consumes dispersant.

Why molecular weight matters

For mineral dispersion, the optimum is usually a narrow distribution around 3,000–8,000 Da. See molecular weight explained. Some producers also partially neutralise with other cations (Mg/Ca) for specific rheology.

Product: ZEELCHEM™ 1000.S7 sodium polyacrylate liquid.

Sodium Polyacrylate Liquid (NaPA) 3D ball-and-stick molecular structure – ZEELCHEM™ 1000.S7 water treatment polymer by ZEEL PRODUCT, VadodaraFEATURED PRODUCT

ZEELCHEM™ 1000.S7 – Sodium Polyacrylate Liquid

Neutral-pH sodium polyacrylate dispersant for water treatment, ceramics, pigments, paper, detergents and mineral slurries.

FAQ

What is a grinding aid?

A dispersant added during wet grinding to keep the slurry fluid as particles become finer.

Why does slurry viscosity increase during storage?

Insufficient dispersant, bacterial growth or ion dissolution can raise it. Optimise the dose and add a preservative.

Is sodium polyacrylate used in paint?

Yes. It is a common pigment dispersant in water-based paints.

ZP
ZEEL PRODUCT Technical Team
Water treatment chemists at ZEEL PRODUCT, Vadodara. ISO 9001:2015 certified manufacturer of ZEELCHEM™ polymers.

More from ZEEL PRODUCT: zeelproduct.com · zeelproduct.net · ZEELCHEM™ range · online shop · zeelproductonline.co.in

Related articles

Need a polymer for your water system?

Share your water analysis and system details. Our technical team will recommend the right ZEELCHEM™ polymer and dosage, and send today's price with TDS, MSDS and COA.