ISO 9001 · 14001 · 22000 certified🚚 Pan-India dispatch from Vadodara
Sodium Polyacrylate Liquid

Sodium Polyacrylate in Paper Coating Colours and Water-Based Paints

Role of sodium polyacrylate dispersants in paper coating colours, wet-end deposit control, and water-based paints and emulsions: dosing, rheology, compatibility and tips.

By ZEEL PRODUCT Technical TeamPublished 2026-07-23Updated 2026-11-203 min read
Quick answer: In paper coating colours, sodium polyacrylate (ZEELCHEM™ 1000.S7) at 0.1–0.5 % on pigment disperses CaCO₃ and kaolin, giving low-viscosity, high-solids colour with good runnability. In water-based paints it is a pigment dispersant (about 0.2–0.6 % on pigment). It is also used for calcium deposit control in paper mill water circuits.

Paper coating colour

Coating colour is a high-solids mix (60–70 %) of pigments (GCC, kaolin), binders (latex, starch), thickeners and additives. Even if the pigments arrive pre-dispersed, extra dispersant is often added at the coating kitchen to:

  • Lower and stabilise low-shear viscosity.
  • Prevent pigment shock when binders are added.
  • Allow higher coating solids, so less drying energy is needed.

Typical dosage

ApplicationDose
Coating colour make-down0.1 – 0.5 % on dry pigment
Water-based paints0.2 – 0.6 % on pigment + extender
Paper mill water circuit deposit control5 – 20 mg/L

Water-based paints

In emulsion paints, sodium polyacrylate wets and stabilises TiO₂ and extenders (calcite, talc, china clay) during the grind stage. The result is better hiding, gloss and colour development, plus storage stability. Use it with a wetting agent and an appropriate defoamer. For defoamers, see ZEELCHEM™ defoamers.

Paper mill deposit control

Calcium carbonate filler and recycled fibre release calcium, which forms deposits on wires, felts and showers. Low doses of polyacrylate disperse these and inhibit scaling. In black-liquor evaporators, HPMA or MA/AA give better high-temperature performance.

Tips

  • Add the dispersant to the water before the pigments.
  • Check the optimum by a viscosity–dose curve.
  • Overdosing can increase foam and water sensitivity of the film.

Product details: ZEELCHEM™ 1000.S7.

Sodium Polyacrylate Liquid (NaPA) 3D ball-and-stick molecular structure – ZEELCHEM™ 1000.S7 water treatment polymer by ZEEL PRODUCT, VadodaraFEATURED PRODUCT

ZEELCHEM™ 1000.S7 – Sodium Polyacrylate Liquid

Neutral-pH sodium polyacrylate dispersant for water treatment, ceramics, pigments, paper, detergents and mineral slurries.

FAQ

Is sodium polyacrylate a thickener?

The low MW grade is a dispersant, not a thickener. High-MW and cross-linked grades thicken.

What dose for paint?

About 0.2–0.6 % on total pigment and extender.

Can it control paper machine deposits?

Yes. Low doses inhibit calcium carbonate deposits in white-water circuits.

ZP
ZEEL PRODUCT Technical Team
Water treatment chemists at ZEEL PRODUCT, Vadodara. ISO 9001:2015 certified manufacturer of ZEELCHEM™ polymers.

More from ZEEL PRODUCT: zeelproduct.com · zeelproduct.net · ZEELCHEM™ range · online shop · zeelproductonline.co.in

Related articles

Need a polymer for your water system?

Share your water analysis and system details. Our technical team will recommend the right ZEELCHEM™ polymer and dosage, and send today's price with TDS, MSDS and COA.