ISO 9001 · 14001 · 22000 certified🚚 Pan-India dispatch from Vadodara
Co-polymer of AA/AMPS

Zinc Stabilisation in Cooling Water: Keeping Zinc Soluble for Corrosion Control

How zinc protects steel as a cathodic inhibitor, why it precipitates above pH 7.5, and how AA/AMPS copolymer and terpolymer keep zinc soluble in zinc and zinc-phosphate programs.

By ZEEL PRODUCT Technical TeamPublished 2026-07-11Updated 2026-11-203 min read
Quick answer: Zinc (0.5–2 mg/L Zn²⁺) is an effective cathodic corrosion inhibitor, but above pH 7.5 it precipitates as zinc hydroxide or carbonate. A sulphonated polymer such as AA/AMPS (ZEELCHEM™ 3100) or terpolymer (ZEELCHEM™ 7000), at roughly 5–10 mg/L product, keeps zinc in solution so it reaches the metal surface instead of fouling the system.

How zinc protects steel

At cathodic sites on corroding steel, the local pH rises. Zinc ions precipitate exactly there as a thin film of zinc hydroxide or zinc phosphate. This blocks oxygen reduction and slows corrosion. Zinc works with phosphate, phosphonates and polymers at low concentrations, typically 0.5–2 mg/L.

The solubility problem

The film-forming chemistry that protects steel also lets zinc precipitate in the bulk water when pH rises above about 7.5. Bulk precipitation wastes zinc, leaves deposits on exchangers and may push discharge levels toward limits.

Polymer stabilisation

Sulphonated polymers adsorb on nascent zinc hydroxide and zinc phosphate nuclei and keep them colloidal and dispersed. Zinc then stays available and moves to cathodic sites. AA/AMPS is the classic zinc stabiliser. The terpolymer gives even more margin at pH 8.5+.

ConditionSuggested stabiliser dose (product)
pH 7.2–7.8, Zn 1 mg/L4 – 6 mg/L AA/AMPS
pH 7.8–8.4, Zn 1–2 mg/L6 – 10 mg/L AA/AMPS or terpolymer
pH > 8.48 – 15 mg/L terpolymer; consider lower zinc

Monitoring

  • Compare total and filtered (0.45 µm) zinc. A large gap means zinc is precipitating.
  • Use corrosion coupons and corrosion rate probes.
  • Check local discharge limits for zinc. Some plants move to non-zinc, non-phosphorus programs.

Typical zinc–phosphate program

Orthophosphate 6–10 mg/L, zinc 1–2 mg/L, HEDP 2–4 mg/L, AA/AMPS or terpolymer 8–15 mg/L, TTA 1–2 mg/L, pH 7.2–7.8. Zinc salts, phosphonates and azoles are available in the ZEELCHEM™ range.

Co-polymer of AA/AMPS 3D ball-and-stick molecular structure – ZEELCHEM™ 3100 water treatment polymer by ZEEL PRODUCT, VadodaraFEATURED PRODUCT

ZEELCHEM™ 3100 – Co-polymer of AA/AMPS

Sulphonated copolymer for calcium phosphate, zinc, iron and silica control in high-stress cooling and RO systems.

FAQ

Why does zinc precipitate in cooling water?

Above about pH 7.5, zinc forms insoluble hydroxide and carbonate.

What is the best zinc stabiliser?

Sulphonated polymers such as AA/AMPS copolymer and terpolymers.

How much zinc is used?

Typically 0.5–2 mg/L as Zn²⁺.

ZP
ZEEL PRODUCT Technical Team
Water treatment chemists at ZEEL PRODUCT, Vadodara. ISO 9001:2015 certified manufacturer of ZEELCHEM™ polymers.

More from ZEEL PRODUCT: zeelproduct.com · zeelproduct.net · ZEELCHEM™ range · online shop · zeelproductonline.co.in

Related articles

Need a polymer for your water system?

Share your water analysis and system details. Our technical team will recommend the right ZEELCHEM™ polymer and dosage, and send today's price with TDS, MSDS and COA.