ISO 9001 · 14001 · 22000 certified🚚 Pan-India dispatch from Vadodara
Co-polymer of AA/AMPS

Silica Scale Control in Cooling Towers and RO: Limits, Chemistry & Polymers

Silica and magnesium silicate scaling explained: solubility limits, pH and temperature effects, cycles limits and how sulphonated polymers extend silica tolerance in cooling and RO systems.

By ZEEL PRODUCT Technical TeamPublished 2026-08-13Updated 2026-11-203 min read
Quick answer: Amorphous silica is soluble up to about 150–180 mg/L as SiO₂ in cooling water at 25–40 °C. Above that, or when magnesium silicate forms at high pH, hard glassy deposits appear that are very difficult to remove. Sulphonated polymers such as AA/AMPS (ZEELCHEM™ 3100) and terpolymer (ZEELCHEM™ 7000) can extend practical silica limits modestly. Cycles must still be limited by silica.

Forms of silica deposits

  • Amorphous silica: polymerised SiO₂, glassy and very hard.
  • Magnesium silicate: forms at high pH and high Mg, with silica.
  • Aluminium and iron silicates: from clarifier carry-over.

Practical limits

SystemTypical SiO₂ limitNotes
Cooling tower (untreated for silica)150 mg/LLower at low temperature
Cooling with silica-dispersing polymer180 – 220 mg/LDepends on pH and Mg
Mg × SiO₂ product (as CaCO₃ × SiO₂)< 35,000 – 40,000Above pH 8.5 risk rises
RO concentrate~120 – 150 % of saturation with antiscalantTemperature-dependent

How polymers help

Silica polymerises rather than crystallises, so classic threshold inhibitors work poorly. Sulphonated polymers such as AA/AMPS and the terpolymer help in two ways. They disperse colloidal silica and limit magnesium silicate deposition, and they keep metal hydroxides (which catalyse silica deposition) dispersed.

Operating tips

  • Set cycles by silica when silica is high in make-up. In many Indian borewell waters, silica, not calcium, limits cycles.
  • Keep pH below about 8.5 in high-Mg, high-silica water.
  • In RO, warmer feed raises silica solubility. Use a silica-capable antiscalant and limit recovery. See RO antiscalant formulation.
  • Silica scale is hard to clean (it needs specialised fluoride-based cleaners), so prevention is far better.
Co-polymer of AA/AMPS 3D ball-and-stick molecular structure – ZEELCHEM™ 3100 water treatment polymer by ZEEL PRODUCT, VadodaraFEATURED PRODUCT

ZEELCHEM™ 3100 – Co-polymer of AA/AMPS

Sulphonated copolymer for calcium phosphate, zinc, iron and silica control in high-stress cooling and RO systems.

FAQ

What is the silica limit in cooling water?

About 150 mg/L as SiO₂ without specific treatment, and up to about 180–220 mg/L with silica-dispersing polymers.

Why is magnesium silicate a problem?

It forms at high pH when both Mg and silica are high, and its deposits are very hard.

Can acid remove silica scale?

Common acids do not dissolve silica. Specialised cleaners are needed.

ZP
ZEEL PRODUCT Technical Team
Water treatment chemists at ZEEL PRODUCT, Vadodara. ISO 9001:2015 certified manufacturer of ZEELCHEM™ polymers.

More from ZEEL PRODUCT: zeelproduct.com · zeelproduct.net · ZEELCHEM™ range · online shop · zeelproductonline.co.in

Related articles

Need a polymer for your water system?

Share your water analysis and system details. Our technical team will recommend the right ZEELCHEM™ polymer and dosage, and send today's price with TDS, MSDS and COA.