ISO 9001 · 14001 · 22000 certified🚚 Pan-India dispatch from Vadodara
Polymaleic Acid (HPMA)

Preventing Scale in Sugar Mill Evaporators with HPMA & MA/AA Antiscalants

How calcium salts form scale in sugar juice evaporators, how HPMA and MA/AA antiscalants extend run time between cleanings, dosage on juice, feed point and food-safety considerations.

By ZEEL PRODUCT Technical TeamPublished 2026-08-06Updated 2026-11-203 min read
Quick answer: Sugar juice evaporators scale with calcium sulphate, calcium oxalate, calcium phosphate and silica as juice concentrates. An HPMA or MA/AA antiscalant, dosed at about 3–10 mg/L on juice before the first effect, slows deposit formation and extends the run between mechanical or chemical cleanings. Use only grades and doses permitted under your food safety approvals.

Why sugar evaporators scale

Clarified juice contains calcium (from liming), sulphate, oxalate, phosphate, silica and organic acids. As water evaporates through 4–5 effects, these salts become supersaturated. The later effects, with higher brix and lower temperature, typically suffer hard calcium oxalate and silicate scale. The first effects see more calcium sulphate and phosphate.

Impact of scale

  • Lower heat transfer coefficient, so more steam is used per tonne of cane.
  • Reduced crushing rate when evaporators become the bottleneck.
  • Downtime for caustic or acid boiling-out and mechanical tube cleaning.

How antiscalants help

HPMA and MA/AA adsorb on growing crystal nuclei and keep them small and non-adherent. Deposits that do form are softer and easier to remove during boil-out. Polymers are effective at the low doses that juice processing requires.

Dosing practice

ParameterGuideline
Dose3 – 10 mg/L on juice (by weight)
Feed pointClear juice line before the first effect, continuous
DilutionPre-dilute 1:10 with condensate for accurate feeding
MonitoringTrack the HTC of each body, steam % cane, and the boil-out interval

Food safety: Sugar is a food product. Use antiscalant grades, purity and dose levels consistent with your regulatory and customer approvals (FSSAI / buyer specifications). ZEEL PRODUCT operates an ISO 22000:2018 food safety management system. Ask us for the relevant documentation.

Other sugar mill uses

Sugar mills also use polymers for cooling tower and boiler treatment. See HPMA for boilers. Process defoamers for sugar and distillery are available on the ZEELCHEM™ defoamer site.

Polymaleic Acid (HPMA) 3D ball-and-stick molecular structure – ZEELCHEM™ 200 water treatment polymer by ZEEL PRODUCT, VadodaraFEATURED PRODUCT

ZEELCHEM™ 200 – Polymaleic Acid (HPMA)

High-temperature scale inhibitor for boilers, evaporators, desalination and high-alkalinity water, effective up to 300 °C.

FAQ

Which effect scales the most?

Usually the last effects, with hard calcium oxalate and silicate scale at high brix.

Does antiscalant remove existing scale?

No. Clean first; antiscalant slows new scale formation.

Is HPMA used in paper mill evaporators?

Yes. It is also used in black liquor evaporators against calcium carbonate scaling.

ZP
ZEEL PRODUCT Technical Team
Water treatment chemists at ZEEL PRODUCT, Vadodara. ISO 9001:2015 certified manufacturer of ZEELCHEM™ polymers.

More from ZEEL PRODUCT: zeelproduct.com · zeelproduct.net · ZEELCHEM™ range · online shop · zeelproductonline.co.in

Related articles

Need a polymer for your water system?

Share your water analysis and system details. Our technical team will recommend the right ZEELCHEM™ polymer and dosage, and send today's price with TDS, MSDS and COA.