ISO 9001 · 14001 · 22000 certified🚚 Pan-India dispatch from Vadodara
Polymaleic Acid (HPMA)

HPMA in Thermal Desalination (MSF & MED): Controlling Alkaline Scale

Why HPMA is the classic antiscalant for multi-stage flash (MSF) and multi-effect distillation (MED) plants: alkaline scale chemistry, top brine temperature, dosing and monitoring.

By ZEEL PRODUCT Technical TeamPublished 2026-07-03Updated 2026-11-203 min read
Quick answer: In MSF and MED desalination, seawater is heated to 60–120 °C, where bicarbonate breaks down and forms CaCO₃ and Mg(OH)₂ (alkaline scale). HPMA (ZEELCHEM™ 200), dosed at about 2–6 mg/L in make-up seawater, controls this scale at high temperature and concentration and allows a higher top brine temperature.

Alkaline scale chemistry

When seawater is heated, bicarbonate decomposes: 2HCO₃⁻ → CO₃²⁻ + CO₂ + H₂O. Carbonate then precipitates calcium as CaCO₃. At higher temperatures, CO₃²⁻ hydrolyses to OH⁻, which precipitates magnesium as Mg(OH)₂ (brucite). These deposits grow on brine heater and evaporator tubes, cut heat transfer and force derating or acid cleaning.

Why HPMA?

HPMA keeps its threshold effect at brine temperatures, tolerates high salinity and concentration factors, and distorts CaCO₃ crystals into easily removed forms. It replaced older acid dosing in many plants. That cut corrosion risk and reduced CO₂ release, but it needs careful control of top brine temperature (TBT).

Dosing guidelines

Plant typeTypical TBTHPMA dose (make-up)
MED60 – 70 °C1.5 – 4 mg/L
MSF (polymer program)90 – 112 °C2 – 6 mg/L
Brine concentrators / evaporatorsVariesBy scaling index & trial

Monitoring

  • Track the fouling factor or overall heat transfer coefficient in each stage.
  • Check calcium and alkalinity balance across the plant.
  • Use sponge-ball cleaning in parallel with chemical treatment.
  • Raise TBT only step by step once performance is proven.

Blends with other polymers

Where suspended solids or iron are present, a small addition of MA/AA or AA/AMPS improves dispersion. For membrane (SWRO) desalination, different chemistry applies. See RO antiscalant formulation.

Polymaleic Acid (HPMA) 3D ball-and-stick molecular structure – ZEELCHEM™ 200 water treatment polymer by ZEEL PRODUCT, VadodaraFEATURED PRODUCT

ZEELCHEM™ 200 – Polymaleic Acid (HPMA)

High-temperature scale inhibitor for boilers, evaporators, desalination and high-alkalinity water, effective up to 300 °C.

FAQ

What is alkaline scale?

CaCO₃ and Mg(OH)₂ deposits formed when bicarbonate in heated seawater breaks down.

Is HPMA used in SWRO?

Usually not alone. RO antiscalants are typically phosphonate–polymer blends tuned for membranes.

What limits top brine temperature?

Scaling tendency (especially of CaSO₄ and Mg(OH)₂) and the antiscalant's thermal limit.

ZP
ZEEL PRODUCT Technical Team
Water treatment chemists at ZEEL PRODUCT, Vadodara. ISO 9001:2015 certified manufacturer of ZEELCHEM™ polymers.

More from ZEEL PRODUCT: zeelproduct.com · zeelproduct.net · ZEELCHEM™ range · online shop · zeelproductonline.co.in

Related articles

Need a polymer for your water system?

Share your water analysis and system details. Our technical team will recommend the right ZEELCHEM™ polymer and dosage, and send today's price with TDS, MSDS and COA.