ISO 9001 · 14001 · 22000 certified🚚 Pan-India dispatch from Vadodara
General guides

Static Jar Test for Scale Inhibitors: How to Measure % Inhibition

Step-by-step laboratory static jar test to compare scale inhibitor polymers for calcium carbonate and calcium phosphate: preparing water, conditions, titration and % inhibition calculation.

By ZEEL PRODUCT Technical TeamPublished 2026-09-24Updated 2026-11-203 min read
Quick answer: In a static jar test, supersaturated calcium carbonate (or phosphate) water is dosed with inhibitor, held at a set temperature (e.g. 70–80 °C for 16–24 h), filtered and titrated for soluble calcium. % inhibition = (Ca_treated − Ca_blank) ÷ (Ca_initial − Ca_blank) × 100.

Purpose

The static jar (bottle) test is a quick, low-cost way to rank inhibitors and find a starting dose under controlled conditions. It does not replace field trials, but it screens options well.

Calcium carbonate test (typical conditions)

ParameterValue
Ca²⁺240 mg/L (as Ca), from CaCl₂
HCO₃⁻732 mg/L, from NaHCO₃
pHAdjust to 8.5–9.0 with borate buffer
Temperature / time80 °C for 10 h (or 70 °C for 16 h)
Inhibitor doses0, 2, 4, 6, 8, 10 mg/L (active)

Calcium phosphate test (typical conditions)

Ca 250 mg/L as CaCO₃, PO₄ 10 mg/L, pH 8.5–9.0, 80 °C, 10–24 h. Measure the remaining soluble phosphate after filtration.

Procedure

  1. Prepare the anion and cation solutions separately in deionised water.
  2. Add the inhibitor to the anion solution first, then the cation solution, and mix.
  3. Adjust the pH and seal the bottles. Include a blank (no inhibitor) and an initial (no heating) bottle.
  4. Incubate at the test temperature.
  5. Cool, filter through a 0.45 µm membrane and analyse calcium (EDTA titration) or phosphate (colorimetric).

Calculation

% Inhibition = (Ct − Cb) ÷ (C0 − Cb) × 100, where Ct is the soluble ion in the treated sample, Cb in the blank, and C0 the initial value.

Interpreting results

  • Plot % inhibition against dose. The plateau shows the minimum effective dose.
  • Compare products on an equal active basis.
  • Check for turbidity at high dose, which signals polymer precipitation.

Typical outcomes: PAA and HPMA excel in the carbonate test, while AA/AMPS and terpolymer lead in the phosphate test.

FAQ

Is a jar test enough to choose a product?

It is a good screen, but confirm with field monitoring or dynamic tests.

Why filter through 0.45 µm?

To separate precipitated scale from dissolved ions.

Which standard methods exist?

Several national and industry standards describe similar static tests. Conditions vary, so compare products in the same test.

ZP
ZEEL PRODUCT Technical Team
Water treatment chemists at ZEEL PRODUCT, Vadodara. ISO 9001:2015 certified manufacturer of ZEELCHEM™ polymers.

More from ZEEL PRODUCT: zeelproduct.com · zeelproduct.net · ZEELCHEM™ range · online shop · zeelproductonline.co.in

Related articles

Need a polymer for your water system?

Share your water analysis and system details. Our technical team will recommend the right ZEELCHEM™ polymer and dosage, and send today's price with TDS, MSDS and COA.