- What is ZEELCHEM™ 1000.Z7?
- ZEELCHEM™ 1000.Z7 is the neutralised sodium salt of low-molecular-weight polyacrylic acid, supplied as a 40 % solution at near-neutral pH.
- What is Sodium Polyacrylate Liquid used for?
- Main uses: calcium carbonate and mineral grinding, paper coating colours, paints, emulsions and pigment pastes, ceramic slips and glazes.
- What is the typical dosage of Sodium Polyacrylate Liquid?
- 1–15 mg/L (ppm) as product in cooling water; the final dose depends on water analysis. Use the dosing calculator on this page.
- What packaging is available?
- 60.0 kg net HDPE carboy.
- What is the price?
- Indicative price ₹ 115 per kg (ex-works Vadodara, GST extra), valid until 31-12-2026. Final price depends on quantity and delivery location; call +91-9724593964 for a firm quote.
- Do you deliver to my city?
- Yes. Sodium Polyacrylate Liquid is supplied Pan-India by road from Vadodara, Gujarat, to all states including Maharashtra, Tamil Nadu, Telangana, Delhi NCR, West Bengal and Madhya Pradesh.
- Who manufactures it?
- ZEEL PRODUCT, Vadodara, Gujarat, India — ISO 9001:2015, ISO 22000:2018 and ISO 14001:2015 certified. TDS, SDS and COA supplied.
Product overview
ZEELCHEM™ 1000.Z7 is the neutralised sodium salt of low-molecular-weight polyacrylic acid, supplied as a 40 % solution at near-neutral pH. It is a highly efficient anionic dispersant that lowers slurry viscosity, prevents settling and inhibits scale, without the acidity of the free-acid polymer.
The neutral pH makes ZEELCHEM™ 1000.Z7 easy to add to pigment slurries, detergent bases and process water without adjusting pH. It adsorbs on particle surfaces and builds electrostatic repulsion, which allows high-solids grinding of calcium carbonate, kaolin, titanium dioxide and other minerals.
In water treatment it acts as a scale inhibitor and dispersant for cooling, boiler and process water where an acidic polymer is not desired, and in detergents it works as a co-builder and anti-redeposition agent.
Key features & benefits
- Near-neutral pH; no pH correction needed
- Efficient dispersant for CaCO₃, kaolin, TiO₂ and pigments
- Lowers viscosity of high-solids slurries
- Scale inhibition and anti-redeposition action
- Good hard-water tolerance
- Low free-monomer content
Applications
- Calcium carbonate and mineral grinding
- Paper coating colours
- Paints, emulsions and pigment pastes
- Ceramic slips and glazes
- Detergents and cleaners
- Textile scouring
- Cooling and process water
Technical specifications
| Appearance | Colourless to light-yellow transparent liquid |
|---|---|
| Solid content | ≥ 40.0 % |
| pH (as is) | 6.0 – 8.0 |
| Free monomer (as acrylic acid) | ≤ 0.50 % |
| Density at 20 °C | ≥ 1.25 g/cm³ |
| Solubility | Completely miscible with water |
Values are typical specifications. Each consignment is supplied with a batch Certificate of Analysis. Custom specifications are available on request.
Dosage & method of use
0.2 – 1.0 % (dry polymer on dry pigment) for mineral and pigment dispersion; 1 – 15 mg/L as a scale inhibitor in water treatment. Determine the optimum dose by a viscosity–dosage curve on your slurry.
Dosing calculator
Estimates only. Evaporation is calculated as E = 0.00153 × R × ΔT (°C); blowdown B = E ÷ (COC − 1); product feed for cooling towers = B × dose. The right dose depends on your water analysis, metallurgy and operating conditions. Our technical team will confirm it free of charge.
Packaging
60.0 kg net HDPE carboy. Each carboy is labelled with product name, batch number, net weight and GHS hazard information.
Storage & shelf life
Store in closed HDPE containers in a cool, shaded, ventilated area between 5 °C and 40 °C. Avoid freezing and direct sunlight; mix gently before use if slight stratification is seen. Shelf life: 12 months in unopened packing.
Handling & safety
Near-neutral polymer solution with low hazard. Use goggles and gloves, avoid eye contact and rinse spills with water. Refer to the ZEELCHEM™ SDS before handling.
Frequently asked questions
What is the difference between ZEELCHEM™ 1000 and 1000.Z7?
ZEELCHEM™ 1000 is acidic polyacrylic acid (pH 2–3); 1000.Z7 is its neutralised sodium salt at pH 6–8, preferred for pigment slurries and detergents.
Is sodium polyacrylate liquid used for calcium carbonate grinding?
Yes. It is a standard grinding and dispersing aid for high-solids calcium carbonate and kaolin slurries.
Can molecular weight be customised?
Yes. Grades tailored to specific slurry or detergent applications can be supplied on request.
What is the typical dosage of Sodium Polyacrylate Liquid?
1–15 mg/L (ppm) as product in cooling water; the final dose depends on water analysis. Use the dosing calculator on this page.
What packaging is available?
60.0 kg net HDPE carboy.
What is the price?
Indicative price ₹ 115 per kg (ex-works Vadodara, GST extra), valid until 31-12-2026. Final price depends on quantity and delivery location; call +91-9724593964 for a firm quote.
Do you deliver to my city?
Yes. Sodium Polyacrylate Liquid is supplied Pan-India by road from Vadodara, Gujarat, to all states including Maharashtra, Tamil Nadu, Telangana, Delhi NCR, West Bengal and Madhya Pradesh.
Who manufactures it?
ZEEL PRODUCT, Vadodara, Gujarat, India — ISO 9001:2015, ISO 22000:2018 and ISO 14001:2015 certified. TDS, SDS and COA supplied.