+91 97245 93964+91 97238 59512[email protected] ISO 9001 · 14001 · 22000 Buy DF Buy NDF
Guides

How to Test Defoamer Efficiency: Shake, Sparge, Cylinder & Ross-Miles Tests

Lab methods to test defoamer and antifoam performance — shake test, air sparge test, cylinder/blender test, Ross-Miles (ASTM D1173) and recirculation test — with a simple scoring sheet.

By ZEELCHEM Technical Team · ZEEL PRODUCT, Vadodara
Published · Updated · 3 min read
How to Test Defoamer Efficiency: Shake, Sparge, Cylinder & Ross-Miles Tests
Quick answer

The simplest ways to test a defoamer are the shake test (shake a measured amount of your liquid with and without defoamer and time the foam collapse), the sparge test (bubble air through the liquid and measure foam height over time), and the blender or recirculation test (high shear). Ross-Miles (ASTM D1173) measures foam height after pouring. Always test in your real process liquid at real temperature.

1. Shake test (quick screening)

  1. Put 100 mL of process liquid in a 250 mL stoppered cylinder.
  2. Add the defoamer at the test dose (e.g. 20, 50, 100 ppm).
  3. Shake a fixed number of times (e.g. 20 vigorous shakes).
  4. Record initial foam volume and time for foam to break.
  5. Repeat the shaking several times to judge persistence.

2. Sparge (air bubbling) test

Bubble air at a fixed flow through a diffuser stone into the liquid in a graduated cylinder. Record foam height every minute. This best simulates aeration tanks and fermenters.

3. Blender / recirculation test

High-speed mixing or pumping the liquid in a loop simulates jet dyeing, paint dispersion and circulation. It also tests shear stability.

4. Ross-Miles (ASTM D1173)

A standard foam test where solution is poured from a set height into a column; foam height is measured initially and after 5 minutes.

Scoring sheet

MeasureBlankProduct AProduct B
Initial foam (mL)
Knockdown time (s)
Foam after 5 min (mL)
Foam after repeat cycles
Side effects (spots, haze)

Need help reading your results? Talk to our technical team.

Frequently asked questions

What is the simplest defoamer test?

The shake test in a stoppered cylinder, comparing foam volume and break time with and without defoamer.

What is a sparge test?

Air is bubbled through the liquid at a fixed rate and foam height is recorded over time.

What is the Ross-Miles test?

A standard foam test (ASTM D1173) measuring foam height when a solution is poured from a fixed height.

Key takeaways

  • Shake for screening, sparge for aeration, blender for shear.
  • Measure knockdown and persistence.
  • Use real liquid at real temperature.
Related searches: defoamer test methodhow to test antifoamshake test defoamersparge testross miles foam test

Related articles

Got a foam problem? Get the right defoamer fast.

Share your process details — our technical team will recommend the right ZEELCHEM™ grade and starting dose, with price.